View All

A750-20-0600 VERNIER CONTROL - 60 INCH - RED KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A790-20-0480 VERNIER CONTROL WIRE - 48 INCH - RED KNOB

The A-790 control has a .078-inch diameter stainless steel wire core. Both the wire core and the flexible steel casing may be shortened as required. Length: 48 inches Solid wire end Color: Red

A790-20-0720 VERNIER CONTROL WIRE - 72 INCH - RED KNOB

The A-790 control has a .078-inch diameter stainless steel wire core. Both the wire core and the flexible steel casing may be shortened as required. Length: 72 inches Solid wire end Color: Red

A800-10-0526 FRICTION LOCK CONTROL - 52.6 INCH - BLACK KNOB

A fine quality control made to exacting aircraft standards. Provides positive lock throughout selected power setting by turning the chrome collect locking nut. Unique ball-socket construction permits the 10-32 threaded end to swivel 8° in any...

AAD9-18-1 FILTER ELEMENT

FAA-PMA approved replacement filter cartridge for 1J7-1 and 1J7-2 air filters Replacement Schedule: Vacuum System Air Filters Replace filter element every 500 service hours or annually Pressure System Air Filters Replace filter element...

CAV-160H-4 SAF-AIR DRAIN VALVE

Thread size: 1/4-18 NPT Hose end: 1/4 inch Applicability: Piper models J-3, J-4, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-23, PA-25 Apache Champion Aeronca Cessna T-50 and earlier 120 and 140 models Beechcraft AT-11...

P5329 STROMBERG GASKET

NOTE: We do not provide manufacturer's certification or similar documentation on this product.

RB9089 ROMEC RELIEF VALVE

This part is surplus inventory from the original manufacturer and is available until our stock runs out.

SA402151-P003 CONTINENTAL STUD

SA638172 CONTINENTAL BUSHING

SL74989 LYCOMING TOP COMPRESSION PISTON RING

Applicability: Lycoming O-320 series engines, see Lycoming parts catalog for exact engine models This product is not to be used in chrome cylinder barrels

STD-1592 LYCOMING HEX HEAD BOLT - DRILLED

Hex head bolt, drilled head Thread: 3/8-16 Length: 3/4 inch Applicability: Lycoming O-235, O-290, O-320, O-340, O-360 and IO-360 series engines, see Lycoming parts catalogs for exact engine models

STD-213 LYCOMING OIL SEAL

Inner Diameter: 3/4 inch Outer Diameter: 1-3/8 inch Width: 5/16 inch Applicability: Lycoming IO-320, LIO-320, O-360, IO-360 and IO-720 series engines, see Lycoming parts catalogs for exact engine models

TACH-36NR NON-RECORDING TACHOMETER CABLE

Applicability: Piper PA-24; Stinson 108 series Assembly length: 36 inches

TACH-43NR NON-RECORDING TACHOMETER CABLE

Applicability: Aeronca 15AC, Bonanza, Ercoupe Assembly length: 43 inches

10-3503 SCINTILLA WASHER

Plain spacer (breaker end bearing) For S6N basic assembly 10-51365