Accessories

BOLT COMPLIMENTARY BOLT GAUGE

Add this handy little ruler/bolt gauge to any order and we will include it free of charge. Tool includes: 8" ruler marked in 1/8" increments AN3 thru AN8 bolt gauge holes Decimal and millimeter equivalents chart AN dash numbers 3 thru 80 length...

AN5823-1 COMPASS CORRECTION CARD

Printed on bristol board 6.25 inches wide by 4.75 inches high

SIC-SAC THE ORIGINAL MOTION SICKNESS BAG

For motion sickness and other emergencies Envelope contains one moisture-proof plastic bag Includes twist tie

AC1213WWA DUPONT WINDOW WIPES - 25 EACH

Made of Aerospace grade Dupont Sontara style 8426 fabric Designed to limit scratches on plastic windshields and windows 12 x 13 inches (30 x 34 cm) Package of 25 Meets spec qualifications for: Boeing Material Specification (BMS 15-5F) Aerospace...

PM25-1 PROMOTIONAL GLIDER - 1 WING

Promotional Univair single-wing toy airplane. Can be flown indoors or outdoors. A perfectly proportioned glider designed for maximum flyability. Made of balsa wood Individually wrapped Assembly required Measures approximately 6.25 inches long with...

302DN VALVE CORE

Supercedes part number 455-124

PM25-3 AERO PROPELLER

Aero-Props - The Super Fun Stunt Flyer AERO-PROPS is the newest model in a line of aerodynamically-advanced toys from Aero-Motion. They are scientifically designed to allow flights of pinpoint accuracy and precision. This hand-launched model works on...

637 VALVE CAP (YELLOW METAL)

ASA-AFT-1 FUEL TESTER - SCREWDRIVER TYPE

For all types of aircraft fuel drain fittings Reversible head - has both slotted and Phillips screwdriver heads

ASA-AFT-C FUEL TESTER CUP

Easy contamination testing for most types of aircraft fuel drain fittings Clear cup with reinforced steel pin Measures 3-1/2" high x 1-3/4" diameter

F391-CUP FLUSH FUEL SAMPLER CUP

With the F391 fuel sampler cup from MDI Aerovalve, checking your sumps is very simple and can usually be done in less than one minute on the average plane. You can also see water or other contaminants which are flushed from the sump. For use with F391...

SP-D316 ACRYLIC DRILL BIT - 3/16 INCH

This 3/16" Pro-Series Plasdrill Bit will drill through acrylics, polycarbonates, laminates, styrenes, and ABS without cracking, chipping, grabbing or melting. Special Design: 60° Point 0° Rake Smooth high-speed drilling Recommended for use...

SP-D18 ACRYLIC DRILL BIT - 1/8 INCH

This 1/8" Pro-Series Plasdrill Bit will drill through acrylics, polycarbonates, laminates, styrenes, and ABS without cracking, chipping, grabbing or melting. Special Design: 60° Point 0° Rake Excellent for high-speed or stack...

JS526500 JEPP PLOTTER PN-A