View All

A-8036 TAYLORCRAFT AILERON BUSHING

Rudder and elevator bushing

9010HD TAYLORCRAFT SHOCK CORD - HEAVY DUTY

Shock cords are priced and sold individually Cold weather equivalent: 9010HD-CW ApplicabilityShock RingSizeTest# Req'd Taylorcraft BC12D, BC12-85, BC19 9010HD 9/16 x 10 475 4

U1713-R325 UNIVAIR RECORDING TACHOMETER CABLE

Applicability: Cessna 120, 140, 170 Piper J-3C, L-4, NE-1, NE-2, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-19, L-18C, PA-18, PA-20, PA-22, PA-28 Meyers Taylorcraft BC12D Assembly length: 32.5 inches Supercedes part numbers TACH-33,...

9090 TAYLORCRAFT SHOCK CORD

Shock cords are priced and sold individually. ApplicabilityShock RingSizeTest# Req'd TaylorcraftAll Model B Series prior to 1946 9090 9/16 x 9 425 4

A-8001 TAYLORCRAFT AILERON HINGE PIN

11104 TAYLORCRAFT SHOCK CORD

Shock cords are priced and sold individually. ApplicabilityShock RingSizeTest# Req'd Taylorcraft L-2 11104 11/16 x 10.5 750 4

9010HDX TAYLORCRAFT SHOCK CORD - HEAVY DUTY

Shock cords are priced and sold individually ApplicabilityShock RingSizeTest# Req'd Taylorcraft F19 and F21 9010HDX1010 9/16 x 105/8 x 10 700800 4

415-52055-6 DELUXE CONTROL WHEEL

Applicability: Ercoupe serial numbers 1 to 4423, Taylorcraft Bored for 7/8 inch shaft; 11 inches wide Cast with heavy plastic covering Shaft hole will need to be reamed. Taper pin holes will also need to be drilled for installation. Excellent for...

UA-A815 TAYLORCRAFT FRONT LIFT STRUT

Applicability: Taylorcraft A Series, B Series, F Series, L-2F, L-2G, L-2H, L-2J, L-2K Oiled and sealed Complies with AD 2007-16-14 FAA-PMA approved This item will be shipped via FREIGHT only

UA-A854 TAYLORCRAFT REAR LIFT STRUT

Applicability: Taylorcraft A Series, B Series, F Series, L-2F, L-2G, L-2H, L-2J, L-2K Oiled and sealed Complies with AD 2007-16-14 FAA-PMA approved This item will be shipped via FREIGHT only

U2690-000 TAYLORCRAFT FRONT JURY STRUT CLAMP

Applicability: Taylorcraft A Series, B Series, F Series, L-2F, L-2G, L-2H, L-2J, L-2K FAA-PMA approved Supercedes part number 2690

UA-500 TAYLORCRAFT AXLE NUT WASHER

Applicability: Taylorcraft B Series, L-2F, L-2G, L-2H, L-2J, L-2K FAA-PMA approved

U1713-N340 UNIVAIR NON-RECORDING TACHOMETER CABLE

Applicability: Cessna 120, 140, 170 Piper J-3C, L-4, NE-1, NE-2, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-19, L-18C, PA-18 Meyers Taylorcraft BC12D Assembly length: 34 inches Supercedes part numbers 486-565 and TACH-34NR FAA-PMA...

U1713-R350 UNIVAIR RECORDING TACHOMETER CABLE

Applicability: Cessna C-120, 140, 170 Piper J-3, PA-12, PA-18, PA-20, PA-22, PA-24 (250/260/400hp), PA-28R (180/200hp) Meyers Taylorcraft BC12D Assembly length: 35 inches Supercedes part number 486-575 FAA-PMA approved

UA-A819 TAYLORCRAFT JURY STRUT ADJUST SCREW

Applicability: Taylorcraft A Series, B Series, F Series, L-2F, L-2G, L-2H, L-2J, L-2K FAA-PMA approved

UA-461 TAYLORCRAFT BOTTOM TAIL BRACE WIRE

Applicability: Taylorcraft BC12-D Series, F-19, F-21 Length: 41 inches Thread Length: 2.00 inches Material: Stainless Steel Wire Diameter: .144/.145 Thread: 8/36 UNF 3A Roll FAA-PMA approved