Univair

U40261-000 UNIVAIR CONTROL STICK CONNECTOR - FITS PIPER

Applicability: Piper J-3, L-4, J-5, L-4F, L-4G, NE-1, NE-2, PA-11, AE-1, HE-1, PA-12, PA-18, PA-19, L-18, L-21 FAA-PMA approved Supercedes part numbers 40261-000, 40261-00

U14422-A UNIVAIR COMPLETE SPINNER ASSEMBLY - FITS PIPER

Complete assembly (spinner dome, front plate, and back plate) Applicability: Piper PA-18/18A (150hp), PA-20, PA-22 (150-160hp, serial numbers 2378 and 2425 to 7642), PA-25 (150hp) Use this...

92WD005100-501 UNIVAIR COLT INSTRUMENT PANEL MODIFICATION - FITS PIPER

Applicability: Piper PA-22 108hp Colt STC approved The later model Tri-Pacers and Colts have a full gyro panel, identified by the raised portion on the left hand side. The production instrument...

U82301-000 UNIVAIR CLIP - FITS PIPER

U40131-000 UNIVAIR CLEVIS WASHER - FITS PIPER

Applicability: Piper J-3, J-5, PA-11, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22 "Bent" clevis washer used with the upper tail brace wires on the vertical fin FAA-PMA approved Supercedes part...

U81102-003 UNIVAIR TIE ROD CLEVIS SQUARE WASHER - FITS PIPER

Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-25

U61341-003 UNIVAIR CLEVIS - FITS PIPER

Applicability: Piper J-3, L-4, NE-1, NE-2, PA-11, PA-12, ARMY L-4C, J-5, L-4F, L-4G, AE-1, HE-1, PA-14, PA-15, PA-16, PA-17, PA-18, PA-19, L-18, L-21, PA-20, PA-22, PA-25 Top wire, upper clevis...

U61341-002 UNIVAIR CLEVIS - FITS PIPER

Applicability: Piper J-3, L-4, NE-1, NE-2, PA-11, PA-12, ARMY L-4C, J-5, L-4F, L-4G, AE-1, HE-1, PA-14, PA-15, PA-16, PA-17, PA-18, PA-19, L-18, L-21, PA-20, PA-22, PA-25 Top wire, lower...

U61340-000 UNIVAIR CLEVIS - FITS PIPER

Applicability: Piper J-3, L-4, NE-1, NE-2, PA-11, PA-12, ARMY L-4C, J-5, L-4F, L-4G, AE-1, HE-1, PA-14, PA-15, PA-16, PA-17, PA-18, PA-19, L-18, L-21, PA-20, PA-22, PA-25 Bottom wire, lower...

U10231-000 UNIVAIR CLEVIS - FITS PIPER

Applicability: Piper J-4, J-5, PA-12, PA-14, PA-20, PA-22

U14929-002 UNIVAIR CLAMP PLATE - FITS PIPER

U10931-000 UNIVAIR CLAMP HINGE BRACKET - FITS PIPER

Applicability: Piper J-5C, PA-12, PA-14 FAA-PMA approved

U14929-003 UNIVAIR CLAMP ASSEMBLY - FITS PIPER

Nose gear steering equalizer clamp Applicability: Piper PA-22-150, PA-22-160 (serial numbers 22-3218, 22-3387 and up) FAA-PMA approved Supercedes part numbers 14929-003, 14929-03

U12408-000 UNIVAIR CLAMP ASSEMBLY - FITS PIPER

Throttle control clamp assembly Applicability: Piper PA-18 FAA-PMA approved

U80222-032 UNIVAIR FLEX TUBE CLAMP - FITS PIPER

Applicability: Piper PA-18A Highlighted part in illustration FAA-PMA approved Supercedes part numbers 80222-032, 80222-32

U80222-027 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-22 FAA-PMA approved Supercedes part numbers 80222-027, 80222-27