Univair

U4-548-2 AERONCA LEADING EDGE SKIN

Length: 50.25 inches Highlighted part in illustration Applicability: Aeronca 7AC, 11AC, Champion 7EC/FC, Citabria (early) 7ECA, 7GCAA, 7GCBC See charts below for aircraft applicability and...

U4-548-15 AERONCA LEADING EDGE SKIN

64" length Applicability: Citabria (1974-1979) 7GCBC, Bellanca Scout 8GCBC See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An...

U4-548-14 AERONCA LEADING EDGE SKIN

47.625" length Applicability: Citabria 7ECA, 7GCAA, 7KCAB, 8GCBC See chart below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An OVERSIZE FEE...

U4-548-12 AERONCA LEADING EDGE SKIN

24.75" length Applicability: Citabria 7ECA, 7GCAA, 7KCAB See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An OVERSIZE FEE will be...

U4-548-11 AERONCA LEADING EDGE SKIN

49 inch length Applicability: Citabria 7ECA, 7GCAA, 7KCAB See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An OVERSIZE FEE will be...

U4-548-16 AERONCA LEADING EDGE SKIN

34" length Applicability: Citabria (1974-1979) 7GCBC, Bellanca Scout 8GCBC See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An...

U4-548-10 AERONCA LEADING EDGE SKIN

34" length Applicability: Citabria (1974-1979) 7GCBC See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip An OVERSIZE FEE will be...

U1-2286 AERONCA JURY STRUT SPREADER

Bottom jury strut Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCBC, 7GCAA, 7KCAB FAA-PMA approved

U1-2315 AERONCA REAR JURY STRUT

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB FAA-PMA approved

U1-2314 AERONCA FRONT JURY STRUT

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB FAA-PMA approved

U3-639 AERONCA DOMED INSPECTION PLATE

This is a "domed" inspection plate measuring 4-7/8 inches in diameter, with two spring steel straps; commonly called the "four pronger" inspection plate. Approved for the Citabria series, it is also...

U1-2321 AERONCA TRIM TAB HORN

U3-478/479 AERONCA HEAT MUFF

Applicability: Aeronca 7AC, 11AC 2 required per aircraft FAA-PMA approved

UAS5-5-902 AERONCA GEAR ATTACH BUSHING

U3-454-R AERONCA GAP COVER - RIGHT

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC FAA-PMA approved

U3-454-L AERONCA GAP COVER - LEFT

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC FAA-PMA approved