Univair

U80002-020 UNIVAIR TAILPIPE BRACE ATTACH CLAMP - FITS PIPER

Applicability: Piper PA-11, PA-18 Approximately 2 inches FAA-PMA approved Supercedes part numbers 80002-020, 80002-20

U80002-013 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-18A FAA-PMA approved Supercedes part numbers 80002-013, 80002-13

U80002-012 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper J-4, J-5, PA-14 FAA-PMA approved Supercedes part numbers 80002-012, 80002-12

U80002-011 UNIVAIR CLAMP - FITS PIPER

U80002-010 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper J-3, J-5 (serial numbers 5-01 to 5-783) Motor mount fuel strainer clamp, 5/8 inch FAA-PMA approved Supercedes part numbers 80002-010, 80002-10

U80002-007 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper J-4, J-5 (serial numbers 5-784 and up), PA-23 FAA-PMA approved Supercedes part numbers 80002-007, 80002-07

U80002-005 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper J-4 FAA-PMA approved Supercedes part numbers 80002-005, 80002-05

U80002-002 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper J-3, J-4, J-5 (serial numbers 5-01 to 5-553, 5-556, 5-559), PA-14 FAA-PMA approved Supercedes part numbers 80002-002, 80002-02

U72691-000 UNIVAIR MUFFLER CLAMP - FITS PIPER

Applicability: Piper J-3, J-5A, PA-15, PA-17 Highlighted part in illustration FAA-PMA approved Supercedes part numbers 72691-000, 72691-00

U70591-002 UNIVAIR MUFFLER CLAMP - FITS PIPER

Muffler stack connecting clamp Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-15, PA-16, PA-17, PA-18 (serial numbers 1 to 3013), PA-20, PA-22 FAA-PMA approved Supercedes part numbers...

U18116-005 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-22 serial numbers 354 and up Tail support attach clamp for muffler shroud For use with rear seat heater FAA-PMA approved Supercedes part numbers 18116-005, 18116-05

U14235-012 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-24-400 (serial numbers 24-125 and up), PA-25 (serial numbers 25-656 and up) FAA-PMA approved

U14235-008 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-24, PA-25, PA-28 (serial numbers 28-10003 to 28-10486) FAA-PMA approved

U14235-000 UNIVAIR CLAMP - FITS PIPER

Exhaust stack and muffler attach clamp Applicability: Piper PA-18 (serial numbers 18-3014 to 18-3780), PA-22 (serial number 22-1949 to 22-2424), PA-24, PA-25, PA-28 FAA-PMA approved

U12833-000 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-20, PA-22 FAA-PMA approved

U12611-000 UNIVAIR REAR JURY STRUT CLAMP - FITS PIPER

Applicability: Piper J-3 with J-3 lift struts installed For Piper J-3 with PA-11 lift struts installed, use clamp U10656-000 FAA-PMA approved