Control System

-1-2399 AERONCA TRIM TAB PULLEY GUARD

U1-2578 AERONCA FRONT BRAKE CABLE HOUSING - LEFT

Applicability: Aeronca 11AC Housing only (cables sold separately) Galvanized steel 2 required FAA-PMA approved

U1-2364S AERONCA RUDDER CABLE

Stainless steel Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Length: 168.69 inches 2 required FAA-PMA approved

U2-698S AERONCA TRIM CABLE

Stainless steel Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA Length: 172.13 inches 2 required FAA-PMA approved

U1-2358-2S AERONCA 7AC BRAKE CABLE

Applicability: Aeronca 7AC Stainless steel Length: 113.5 inches 2 required FAA-PMA approved

U1-2397 AERONCA AILERON CABLE

Galvanized steel Applicability: Aeronca 7AC, 11AC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Length: 35.5 inches 2 required

U1-2599 AERONCA BEARING BLOCK

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB FAA-PMA approved

U1-670-2 AERONCA THROTTLE CONTROL CABLE

Length: 60 inches Applicability: Aeronca O-58A, O-58B FAA-PMA approved

U1-2383 AERONCA CONTROL TUBE

Torque control tube Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB FAA-PMA approved

U2-776-2 AERONCA BRAKE CABLE

Applicability: Aeronca 11AC Length: 72 inches FAA-PMA approved

U3-1072S AERONCA ELEVATOR UP CABLE

Applicability: Aeronca 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Stainless steel Length: Long section 134.3125 inches; short section 8.9375 inches Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved

U1-2280 AERONCA SHORT RUDDER CABLE

Applicability: Aeronca 7AC, 7EC, 7FC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Length: 28.75 inches Galvanized steel 2 required FAA-PMA approved

U1-2496-3 AERONCA RUDDER CABLE

Applicability: Aeronca 11AC Galvanized steel Length: 184.1875 inches FAA-PMA approved

U2-1905S AERONCA TRIM CABLE

Stainless steel Applicability: Aeronca 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Length: 183.3125 inches FAA-PMA approved

U1-2397S AERONCA AILERON CABLE

Stainless steel Applicability: Aeronca 7AC, 11AC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Length: 35.5 inches 2 required

U3-1072 AERONCA ELEVATOR UP CABLE

Applicability: Aeronca 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Galvanized steel Length: Long section 134.3125 inches; short section 8.9375 inches Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved