View All

AD42BSLF AERONCA FABRIC POP RIVET

1/8 inch diameter, 1/4 inch long Supercedes part number U1201-00

U1-2331 AERONCA FABRIC WASHER

Aluminum Applicability: Aeronca 7AC, 11AC FAA-PMA approved

-276D AERONCA EYELET BUSHING (SHORT)

U1-3737 AERONCA TAIL SURFACE HINGE PIN BUSHING - 1/4 INCH ID

1/4 inch inner diameter Applicability: Aeronca 7ECA, 7GCAA, 7GCBC, 7KCAB FAA-PMA approved

U1-557-1 AERONCA TAILSPRING PAD

Applicability: Aeronca 7AC, 11AC, 7EC, 7ECA, 7FC, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB FAA-PMA approved

U31322-000 UNIVAIR SHOCK CORD

Shock cords are priced and sold individually Cold weather equivalent: 1280-CW FAA-PMA approved Supercedes part numbers 1280, 31322-000, 31322-00 ApplicabilityShock RingSizeTest# Req'd Aeronca 15AC Serial numbers 1 to 329 1280 3/4 x...

U1-557-2 AERONCA TAILSPRING PAD

Applicability: Aeronca 7AC, 11AC, 7EC, 7ECA, 7FC, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB FAA-PMA approved

U1-2395 AERONCA CONTROL PULLEY

Rudder trim fairlead pulley Aluminum Applicability: Aeronca 7AC, 11AC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB FAA-PMA approved

U3-639 AERONCA DOMED INSPECTION PLATE

This is a "domed" inspection plate measuring 4-7/8 inches in diameter, with two spring steel straps; commonly called the "four pronger" inspection plate. Approved for the Citabria series, it is also desired by other owners of aerobatic aircraft. It is...

U1-2119 AERONCA OLEO STRUT PACKING

For U3-433-1 assembly

U1-3737-1 AERONCA TAIL SURFACE HINGE PIN BUSHING - 3/16 INCH ID

3/16 inch inner diameter

U3-428 AERONCA TAILWHEEL SPRING SET

Applicability: Aeronca 7AC, 11AC, 7EC, 7ECA, 7GCAA, 7GCBC (early) FAA-PMA approved Set Includes: Part NumberDescriptionQuantity U3-428-3 Tailwheel Spring - Top Leaf 1 U3-428-2 Tailwheel Spring - Middle...

U2-1525 AERONCA TAILWHEEL STEERING SPRING

Applicability: Aeronca 7ECA,  7CGAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB FAA-PMA approved

U1-2340 AERONCA TAIL BRACE WIRE

Applicability: 7AC, S7AC, 7BCM, 7CCM, 7DC, S7CCM, 7EC, S7EC, 7FC, 7GC, 7HC, 7GCA, 7JC, 7GCB, 7KC, 7GCBA, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC, S11AC, 11BC, S11BC, 11CC, S11CC, 11AC Length: 45.875 inches Thread Length: 1.50 inches Material:...

UASI-5028-1-22 AERONCA OLEO BUSHING

U7-1475-4 AERONCA AIR INDUCTION TUBE

Applicability: Aeronca 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB FAA-PMA approved