Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE Stainless steel Applicability: Piper PA-18 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET Allows installation of a rudder mounted anti-collision light or strobe light Applicability: Piper PA-18 Material: Fiberglass and Aluminum Compatible with Whelen A470 and Grimes 30-0465-5 strobe lights Installation instructions and STC paperwork... MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT These cables are only applicable for PA-12 aircraft converted to PA-18 gear. Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length... MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE Attaches the shoulder harness to the fuselage frame thereby increasing safety of pilot and passengers during turbulence or accident. Fits 1-1/8 inch tubes Rear clamp-on bracket Material: Stainless steel Sold without seat belts Applicability: Piper... MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE Stainless steel Applicability: Piper PA-18 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET Allows installation of a rudder mounted anti-collision light or strobe light Applicability: Piper PA-18 Material: Fiberglass and Aluminum Compatible with Whelen A470 and Grimes 30-0465-5 strobe lights Installation instructions and STC paperwork... MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT These cables are only applicable for PA-12 aircraft converted to PA-18 gear. Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length... MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE Attaches the shoulder harness to the fuselage frame thereby increasing safety of pilot and passengers during turbulence or accident. Fits 1-1/8 inch tubes Rear clamp-on bracket Material: Stainless steel Sold without seat belts Applicability: Piper... MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET Allows installation of a rudder mounted anti-collision light or strobe light Applicability: Piper PA-18 Material: Fiberglass and Aluminum Compatible with Whelen A470 and Grimes 30-0465-5 strobe lights Installation instructions and STC paperwork... MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT These cables are only applicable for PA-12 aircraft converted to PA-18 gear. Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length... MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE Attaches the shoulder harness to the fuselage frame thereby increasing safety of pilot and passengers during turbulence or accident. Fits 1-1/8 inch tubes Rear clamp-on bracket Material: Stainless steel Sold without seat belts Applicability: Piper... MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT These cables are only applicable for PA-12 aircraft converted to PA-18 gear. Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length... MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE Attaches the shoulder harness to the fuselage frame thereby increasing safety of pilot and passengers during turbulence or accident. Fits 1-1/8 inch tubes Rear clamp-on bracket Material: Stainless steel Sold without seat belts Applicability: Piper... MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE Attaches the shoulder harness to the fuselage frame thereby increasing safety of pilot and passengers during turbulence or accident. Fits 1-1/8 inch tubes Rear clamp-on bracket Material: Stainless steel Sold without seat belts Applicability: Piper... MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE This modification adds a fueling step to the outside of the front strut of the main landing gear. No more step ladder for refueling! Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-18, PA-20, PA-22 Clamp-on refueling step... MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability: Piper... MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder... MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 This heater kit modification provides heating to rear seat passengers. A must have for Super Cubs in winter! Applicability: Piper PA-18 with Lycoming engines Diverter box and push pull cables are stainless steel, hoses are 2″ CEET and 2″... MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). 1.25 inch axle, standard length Applicability: Piper J-3, PA-11, PA-18, PA-19 PMA approval Comes with bushings installed in forward and aft upper attach fittings &... MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT This defroster kit has its own diverter box, control and outlets. It is installed AFT of the cabin heat box on the inside of the cockpit. Installation time varies from 4 to 8 hours depending on the aircraft. The kit uses 2 inch CEET hose and works very... MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3190-12 3190-12 REFUELING STEP - 1.5 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3359-6 3359-6 WATER RUDDER PICKUP TUBE MSRP: Now: $70.00 Add to Cart Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2087 2087 RUDDER STROBE LIGHT MOUNTING BRACKET MSRP: Now: $401.00 Add to Cart Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2089-12 2089-12 PIPER SAFETY CABLE KIT MSRP: Now: $277.00 Choose Options Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3232-2-1-1/8 3232-2-2-1/8 SHOULDER HARNESS ATTACH BRACKET - REAR - 1.125 INCH TUBE MSRP: Now: $228.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3190-10 3190-10 REFUELING STEP - 1.25 INCH TUBE MSRP: Now: $152.00 Add to Cart Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3192-18DL 3192-18DL FRONT LIFT STRUT REINFORCEMENT BRACKET MSRP: Now: $166.00 Add to Cart Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3242-18 3242-18 UNIVERSAL DEFROSTER KIT - FITS PIPER MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 1022-12 1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER MSRP: Now: $281.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3175 3175 REAR SEAT HEATER KIT - FITS PIPER PA-18 MSRP: Now: $1,021.00 Add to Cart Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3225-2 3225-2 PIPER 1.25 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,111.00 Choose Options Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3242-12 3242-12 UNIVERSAL DEFROSTER KIT - FITS PIPER, TAYLORCRAFT MSRP: Now: $1,043.00 Add to Cart Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next × OK
Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next
Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next
