View All

17671 FRANKLIN INLET MANIFOLD GASKET

6 required on 150hp and 165hp Franklin engines Priced and sold individually

U17662 FRANKLIN PROPELLER BOLT

Applicability: Franklin engines 6A4-145-A3, 6A4-150-B3, 6A4-165-B3 8 bolts required for 150hp and 165hp Franklin engines FAA-PMA approved Priced and sold individually

RG-17727 FRANKLIN VALVE COVER GASKET

For the following Franklin engines: 6A-350 4A-235 6A4-150-B3, -B4, -B5, -B6 6A4-165-B3, B4, B6 6A4-200-C6 6AS-350 6AS-335 Made from aerospace mechanical grade AMS silicone rubber Gasket is 1/8" thick and has 6 bolt holes Withstands...

RG-17864 FRANKLIN PUSHROD TUBE UPPER SEAL GASKET

For the following Franklin engines: 4A-235 6A4-150-B3, -B4 6A4-165-B3, -B4, -B6 6A4-200-C6 6A-350 Series 6AS-335, -350 Series Requires 2 seals per cylinder; priced and sold individually Made from aerospace mechanical grade AMS silicone...

17864 FRANKLIN PACKING

Valve lifter rod tube packing (cylinder end - small) 24 required on 150 hp Franklin engines 12 required on 165 hp Franklin engines Priced and sold individually

14872 FRANKLIN LOCK WASHER

RG-17794 FRANKLIN PUSHROD TUBE LOWER SEAL GASKET

For the following Franklin engines: 4A-235 Series 6A-350 Series 6A4-165-B3, -B4, -B6 6A4-200 6AS-335 Series 6AS-350 Series Requires 2 seals per cylinder; priced and sold individually Made from aerospace mechanical grade AMS silicone...

10601 FRANKLIN MAGNETO SHOCK ABSORBER GEAR

24 required on 150 hp Franklin engines 16 required on 165 hp Franklin engines For numbers 1 to 32083 engines only Priced and sold individually

5512 FRANKLIN MAGNETO GASKET

2 required on 150 and 165 hp Franklin engines Priced and sold individually

5637 FRANKLIN GASKET

17794 FRANKLIN PACKING

Valve lifter rod tube packing (crankcase end - large) 12 required on 165hp Franklin engines Not applicable on 150hp engines Priced and sold individually

CH48108-1 CHAMPION OIL FILTER ASSEMBLY

Please refer to the Champion Oil Filter Application Chart for exact aircraft and engine model applicability. Applicability: Cessna - single engine models Beech Bonanza, Baron Dimensions: A - 4.48" B - 0.43" C - 1.00" Hex D - 3.71" Thread -...

RHB32E CHAMPION SPARK PLUG

Refer to this application guide for exact engine model applicability. Thread Size: 18mm Reach: 13/16" Shielding Thread: 3/4"-20 Standard Electrode: Two Prong Plug Gap: .016"-.021" Supercedes part number...

17729 FRANKLIN CYLINDER BASE SEAL RING

6 required on 150 and 165 hp Franklin engines Priced and sold individually

REJ38 CHAMPION SPARK PLUG

Refer to this application guide for exact engine model applicability. Thread Size: 14mm Reach: 3/8" Shielding Thread: 5/8"-24 Standard Electrode: Single Plug Gap: .018"-.023" Supercedes part number SA43 Engine: Franklin Continental

14627 FRANKLIN PACKING