View All

A700BALL BALL - 1/8 INCH DIAMETER

Stainless steel ball bearing Diameter: 1/8 inch

A730-10-1260 PUSH-PULL CONTROL - 126 INCH - BLACK KNOB

Basic push-pull control and glide-free action, with solid wire end. Ideal for cabin and carburetor heat, or fresh air controls. May be cut to the specific length you require for your particular application. Length: 126 inches Solid wire end Black...

A750-10-0290 VERNIER CONTROL - 29 INCH - BLACK KNOB

The A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-10-0330 VERNIER CONTROL - 33 INCH - BLACK KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-10-0530 VERNIER CONTROL - 53 INCH - BLACK KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-10-0720 VERNIER CONTROL - 72 INCH - BLACK KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-20-0530 VERNIER CONTROL - 53 INCH - RED KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-30-0287 VERNIER CONTROL - 28.75 INCH - BLUE KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A750-30-0710 VERNIER CONTROL - 71 INCH - BLUE KNOB

A-750 control has 10-32 threaded shaft for use with ball joint or AN665-21R threaded terminal. Ball-socket construction lets the threaded end swivel 8° in any direction. Measured from under panel nut to end of threaded shaft with knob pushed in...

A78-356 MARVEL WASHER

A78-357 MARVEL WASHER

A790BALL BALL - 5/32 INCHES DIAMETER

Stainless steel ball bearing Diameter: 5/32 inch

A800-20-0480 FRICTION LOCK CONTROL - 48 INCH - RED KNOB

A fine quality control made to exacting aircraft standards. Provides positive lock throughout selected power setting by turning the chrome collect locking nut. Unique ball-socket construction permits the 10-32 threaded end to swivel 8° in any...

A920-0530 PUSH PULL CONTROL - 53 INCH - NO KNOB

Push-pull controls with flexible metal casings designed for use with throttle quadrants. 10-32 threaded ends with 8° swivel, 3.5 inch stroke Length: 53 inches No knob

A920-0720 PUSH PULL CONTROL - 72 INCH - NO KNOB

Push-pull controls with flexible metal casings designed for use with throttle quadrants. 10-32 threaded ends with 8° swivel, 3.5 inch stroke Length: 72 inches No knob

A920-0800 PUSH PULL CONTROL - 80 INCH - NO KNOB

Push-pull controls with flexible metal casings designed for use with throttle quadrants. 10-32 threaded ends with 8° swivel, 3.5 inch stroke Length: 80 inches No knob