Ceconite | part number: 102-70X CECONITE 102 FABRIC This custom-woven fabric style is approved under STC SA4503NM and available for installation on approved certified aircraft as listed on FAA Approved Model List No. 4503 published in the Ceconite Procedure Manual 101. Considered our standard fabric, it... MSRP: Was: Now: $15.78 - $789.00 Choose Options
Poly-Fiber | part number: 1-MEDIUM-X POLY-FIBER MEDIUM FABRIC This custom-woven fabric style is approved under STC SA1008WE and available for installation on approved certified aircraft as listed on FAA Master Eligibility List No. 1008 published in the Poly-Fiber Procedure Manual No. 1. Considered our standard... MSRP: Was: Now: $15.78 - $789.00 Choose Options
Ceconite | part number: CST CECONITE SURFACE TAPES All Ceconite surface tapes are sold by the roll Available in various widths and edge types shown below Availability Chart Tape Type25 yards50 yards Straight Edge Not Available 1, 1.5, 2, 3, 4, and 6 inch widths Pinked Edge 1, 1.5,... MSRP: Was: Now: $28.14 - $95.82 Choose Options
Ceconite | part number: 101-70X CECONITE 101 FABRIC This custom-woven fabric style is approved under STC SA4503NM and available for installation on approved certified aircraft as listed on FAA Approved Model List No. 4503 published in the Ceconite Procedure Manual 101. Our extra heavy-duty fabric... MSRP: Was: Now: $17.58 - $879.00 Choose Options
Poly-Fiber | part number: 2-PS-X POLY-SPRAY Poly-Spray is a high-solids, one part aluminum pigmented, air-drying coating used to protect the fabric from ultraviolet damage and as a sanding base to develop a smooth finish. Reduce 4 to 1 with Poly-Fiber Reducer. Refer to the Poly-Fiber Manual for... MSRP: Was: Now: $36.08 - $119.35 Choose Options
Poly-Fiber | part number: 2-PB-X POLY-BRUSH Poly-Brush is a high-solids, one part, air drying adhesive coating formulated for the first and second coats to penetrate and seal the fabric weave and attach all polyester finishing tapes and reinforcing patches. It provides twice the peel resistance as... MSRP: Was: Now: $33.17 - $121.36 Choose Options
Poly-Fiber | part number: 2-65-x POLY-FIBER R-65-75 REDUCER A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray, and Poly-Tone. Reducer R-65-75 is the standard reducer recommended for viscosity control in normal temperatures 65° and 75° F. Available in 1 quart and 1... MSRP: Was: Now: $27.64 - $68.28 Choose Options
Poly-Fiber | part number: 11-PSC 11-PSC PAINT STRAINER CONE Fine mesh, 60x48, for filtering all pigmented finishes, Poly-Brush, Poly-Spray, varnish, and other liquids. Imprinted with Poly-Fiber logo. MSRP: Now: $0.75 Add to Cart Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT A high-strength, fast-drying, one part cement manufactured from a proprietary formula especially to attach polyester fabric to airframes. It is FAA Approved with the Poly-Fiber STC for use in a 2" overlap cement seam on the wing leading edge and a 1"... MSRP: Was: Now: $38.94 - $142.52 Choose Options Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT This is an improvement of original Ceconite Super Seam Cement. This new formulation is clear, vinyl-based cement that is compatible with all Randolph dopes. Twice the peel strength of original Super Seam. Used out of the can with no thinning, dries in 15... MSRP: Was: Now: $38.94 - $142.52 Choose Options Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE A custom woven high-strength polyester filament twill tape with a paper-protected high-tack adhesive coating on one side for quick application and bonding. Available Tape Widths: 1/4 inch, 3/8 inch, and 1/2 inch Roll Length: 60 yards MSRP: Was: Now: $81.86 - $96.43 Choose Options Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST An aliphatic polyisocyanate in a solvent blend for use in Aero-Thane and UV-550 Urethane Varnish. Refer to directions on the base component listing. Available in 1/2 pint and 1 quart sizes Shelf Life: Guaranteed two years from date of manufacture,... MSRP: Was: Now: $41.73 - $128.12 Choose Options Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC Our light-weight fabric is recommended for covering plywood surfaces on any aircraft and any ultralight aircraft that is not certified. On certified aircraft, it is only approved for covering plywood surfaces. This fabric will be unstamped... MSRP: Was: Now: $11.58 - $579.00 Choose Options Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE Width: 1 inch Length: 60 yards MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE Available lengths: 3, 6, and 12 inches 12 inch needle has straight shaft and curved tip 3 and 6 inch needles are completely curved (shaped like the letter "C") MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE Available in 1 quart and 1 gallon sizes Poly-Fiber color 105 Can be used on metal and fabric Air dries to a satin gloss and can be polished for higher luster Refer to Poly-Fiber's Color Card for actual color swatches This product is classified as... MSRP: Was: Now: $38.16 - $126.82 Choose Options Ceconite | part number: 102-70X CECONITE 102 FABRIC MSRP: Was: Now: $15.78 - $789.00 Choose Options Poly-Fiber | part number: 1-MEDIUM-X POLY-FIBER MEDIUM FABRIC MSRP: Was: Now: $15.78 - $789.00 Choose Options Ceconite | part number: CST CECONITE SURFACE TAPES MSRP: Was: Now: $28.14 - $95.82 Choose Options Ceconite | part number: 101-70X CECONITE 101 FABRIC MSRP: Was: Now: $17.58 - $879.00 Choose Options Poly-Fiber | part number: 2-PS-X POLY-SPRAY MSRP: Was: Now: $36.08 - $119.35 Choose Options Poly-Fiber | part number: 2-PB-X POLY-BRUSH MSRP: Was: Now: $33.17 - $121.36 Choose Options Poly-Fiber | part number: 2-65-x POLY-FIBER R-65-75 REDUCER MSRP: Was: Now: $27.64 - $68.28 Choose Options Poly-Fiber | part number: 11-PSC 11-PSC PAINT STRAINER CONE MSRP: Now: $0.75 Add to Cart Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE MSRP: Was: Now: $81.86 - $96.43 Choose Options Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST MSRP: Was: Now: $41.73 - $128.12 Choose Options Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC MSRP: Was: Now: $11.58 - $579.00 Choose Options Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE MSRP: Was: Now: $38.16 - $126.82 Choose Options 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT A high-strength, fast-drying, one part cement manufactured from a proprietary formula especially to attach polyester fabric to airframes. It is FAA Approved with the Poly-Fiber STC for use in a 2" overlap cement seam on the wing leading edge and a 1"... MSRP: Was: Now: $38.94 - $142.52 Choose Options
Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT This is an improvement of original Ceconite Super Seam Cement. This new formulation is clear, vinyl-based cement that is compatible with all Randolph dopes. Twice the peel strength of original Super Seam. Used out of the can with no thinning, dries in 15... MSRP: Was: Now: $38.94 - $142.52 Choose Options
Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE A custom woven high-strength polyester filament twill tape with a paper-protected high-tack adhesive coating on one side for quick application and bonding. Available Tape Widths: 1/4 inch, 3/8 inch, and 1/2 inch Roll Length: 60 yards MSRP: Was: Now: $81.86 - $96.43 Choose Options
Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST An aliphatic polyisocyanate in a solvent blend for use in Aero-Thane and UV-550 Urethane Varnish. Refer to directions on the base component listing. Available in 1/2 pint and 1 quart sizes Shelf Life: Guaranteed two years from date of manufacture,... MSRP: Was: Now: $41.73 - $128.12 Choose Options
Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC Our light-weight fabric is recommended for covering plywood surfaces on any aircraft and any ultralight aircraft that is not certified. On certified aircraft, it is only approved for covering plywood surfaces. This fabric will be unstamped... MSRP: Was: Now: $11.58 - $579.00 Choose Options
Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE Width: 1 inch Length: 60 yards MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE Available lengths: 3, 6, and 12 inches 12 inch needle has straight shaft and curved tip 3 and 6 inch needles are completely curved (shaped like the letter "C") MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE Available in 1 quart and 1 gallon sizes Poly-Fiber color 105 Can be used on metal and fabric Air dries to a satin gloss and can be polished for higher luster Refer to Poly-Fiber's Color Card for actual color swatches This product is classified as... MSRP: Was: Now: $38.16 - $126.82 Choose Options Ceconite | part number: 102-70X CECONITE 102 FABRIC MSRP: Was: Now: $15.78 - $789.00 Choose Options Poly-Fiber | part number: 1-MEDIUM-X POLY-FIBER MEDIUM FABRIC MSRP: Was: Now: $15.78 - $789.00 Choose Options Ceconite | part number: CST CECONITE SURFACE TAPES MSRP: Was: Now: $28.14 - $95.82 Choose Options Ceconite | part number: 101-70X CECONITE 101 FABRIC MSRP: Was: Now: $17.58 - $879.00 Choose Options Poly-Fiber | part number: 2-PS-X POLY-SPRAY MSRP: Was: Now: $36.08 - $119.35 Choose Options Poly-Fiber | part number: 2-PB-X POLY-BRUSH MSRP: Was: Now: $33.17 - $121.36 Choose Options Poly-Fiber | part number: 2-65-x POLY-FIBER R-65-75 REDUCER MSRP: Was: Now: $27.64 - $68.28 Choose Options Poly-Fiber | part number: 11-PSC 11-PSC PAINT STRAINER CONE MSRP: Now: $0.75 Add to Cart Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE MSRP: Was: Now: $81.86 - $96.43 Choose Options Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST MSRP: Was: Now: $41.73 - $128.12 Choose Options Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC MSRP: Was: Now: $11.58 - $579.00 Choose Options Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE MSRP: Was: Now: $38.16 - $126.82 Choose Options 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE Available lengths: 3, 6, and 12 inches 12 inch needle has straight shaft and curved tip 3 and 6 inch needles are completely curved (shaped like the letter "C") MSRP: Was: Now: $4.70 - $21.40 Choose Options
Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE Available in 1 quart and 1 gallon sizes Poly-Fiber color 105 Can be used on metal and fabric Air dries to a satin gloss and can be polished for higher luster Refer to Poly-Fiber's Color Card for actual color swatches This product is classified as... MSRP: Was: Now: $38.16 - $126.82 Choose Options
Poly-Fiber | part number: 1-MEDIUM-X POLY-FIBER MEDIUM FABRIC MSRP: Was: Now: $15.78 - $789.00 Choose Options
Poly-Fiber | part number: 2-65-x POLY-FIBER R-65-75 REDUCER MSRP: Was: Now: $27.64 - $68.28 Choose Options
Poly-Fiber | part number: 11-PSC 11-PSC PAINT STRAINER CONE MSRP: Now: $0.75 Add to Cart Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE MSRP: Was: Now: $81.86 - $96.43 Choose Options Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST MSRP: Was: Now: $41.73 - $128.12 Choose Options Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC MSRP: Was: Now: $11.58 - $579.00 Choose Options Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE MSRP: Was: Now: $38.16 - $126.82 Choose Options 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next
Poly-Fiber | part number: 2-PT-X POLY-TAK FABRIC CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options
Ceconite | part number: 90x CECONITE NEW SUPER SEAM CEMENT MSRP: Was: Now: $38.94 - $142.52 Choose Options
Poly-Fiber | part number: 1-RTX POLY-FIBER RIB LACE REINFORCING TAPE MSRP: Was: Now: $81.86 - $96.43 Choose Options
Poly-Fiber | part number: 6-865-x POLY-FIBER U-865 URETHANE CATALYST MSRP: Was: Now: $41.73 - $128.12 Choose Options
Poly-Fiber | part number: 1-LIGHTU-X POLY-FIBER UNCERTIFIED LIGHT FABRIC MSRP: Was: Now: $11.58 - $579.00 Choose Options
Poly-Fiber | part number: 11-MTC 11-MTC CLOTH ADHESIVE ANTI-CHAFE TAPE MSRP: Now: $20.05 Add to Cart Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE MSRP: Was: Now: $4.70 - $21.40 Choose Options Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE MSRP: Was: Now: $38.16 - $126.82 Choose Options 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next
Poly-Fiber | part number: 11-CNX CURVED FABRIC STITCHING NEEDLE MSRP: Was: Now: $4.70 - $21.40 Choose Options
Poly-Fiber | part number: 3-105-X POLY-TONE - INSIGNIA WHITE MSRP: Was: Now: $38.16 - $126.82 Choose Options
