AN381-2-6 COTTER PIN

Cotter pin Material: Stainless steel Nominal Diameter: 1/16 inch Dimensions: A: 3/8 inch B: 1/16 inch C: 1/16 inch

AN380-8-10 COTTER PIN

Cotter pin Material: Steel, cadmium plated Dimensions: Length (L): 2-1/2 inch Nominal Diameter: 1/4 inch

AN380-8-8 COTTER PIN

Cotter pin Material: Steel, cadmium plated Dimensions: Length (L): 2 inch Nominal Diameter: 1/4 inch

AN380-2-2 COTTER PIN

Cotter pin Material: Steel, cadmium plated Supercedes part number 424-051 Dimensions: Length (L): 1/2 inch Nominal Diameter: 1/16 inch

AN381-2-10 COTTER PIN

Cotter pin Material: Stainless steel Nominal Diameter: 1/16 inch Alternate part number MS24665-153 Dimensions: A: 5/8 inch B: 1/16 inch C: 1/16 inch

MS20219-4 SECONDARY CONTROL PULLEY

Aircraft secondary control groove pulley Material: Phenolic body Cable Size: 1/16 and 3/32 inch Supercedes part number AN219-4 Dimensions: A: 2-5/8 inch B: 7/16 inch C: 1/4 inch

AN214-1 CONTROL PULLEY

AN5823-1 COMPASS CORRECTION CARD

Printed on bristol board 6.25 inches wide by 4.75 inches high

AN177-34 CLOSE TOLERANCE BOLT - 7/16 X 3-19/32 INCH

Close tolerance bolt, hex head, drilled shank Material: Steel Length: 3-19/32 inch Thread: 7/16-20 Grip: 2-15/16 inch Wrench Size: 5/8 inch

AN173-17A CLOSE TOLERANCE BOLT - 3/16 X 1-29/32 INCH

Close tolerance bolt, hex head, undrilled Material: Steel Length: 1-29/32 inch Thread: 3/16-32 Grip: 1-1/2 inch Wrench Size: 3/8 inch

AN175-20 CLOSE TOLERANCE BOLT - 5/16 X 2-3/32 INCH

Close tolerance bolt, hex head, drilled shank Material: Steel Length: 2-3/32 inch Thread: 5/16-24 Grip: 1-9/16 inch Wrench Size: 1/2 inch

AN175-26A CLOSE TOLERANCE BOLT - 5/16 X 2-27/32 INCH

Close tolerance bolt, hex head, undrilled Material: Steel Length: 2-27/32 inch Thread: 5/16-24 Grip: 2-5/16 inch Wrench Size: 1/2 inch

AN175-17 CLOSE TOLERANCE BOLT - 5/16 X 1-31/32 INCH

Close tolerance bolt, hex head, drilled shank Material: Steel Length: 1-31/32 inch Thread: 5/16-24 Grip: 1-7/16 inch Wrench Size: 1/2 inch

AN175H10 CLOSE TOLERANCE BOLT - 5/16 X 1-3/32 INCH

Close tolerance bolt, drilled hex head, drilled shank Material: Steel Length: 1-3/32 inch Thread: 5/16-24 Grip: 9/16 inch Wrench Size: 1/2 inch

AN176-32A CLOSE TOLERANCE BOLT - 3/8 X 3-5/16 INCH

Close tolerance bolt, hex head, undrilled Material: Steel Length: 3-5/16 inch Thread: 3/8-24 Grip: 2-11/16 inch Wrench Size: 9/16 inch

AN176H26 CLOSE TOLERANCE BOLT - 3/8 X 2-53/64 INCH

Close tolerance bolt, drilled hex head, drilled shank Material: Steel Length: 2-53/64 inch Thread: 3/8-24 Grip: 2-3/16 inch Wrench Size: 9/16 inch