Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER Upgrading to our coreless muffler will increase the static RPM 30-65 RPM on average. Most aircraft will experience a slight increase in rate of climb. The EGT and oil temperature will be slightly lower and the muffler has a louder and deeper sound... MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER This muffler eliminates the AD 68-05-01. When muffler is purchased, the STC paperwork includes a FAA letter stating that the installation of this muffler is an alternative means of compliance to the A.D. Applicability: Piper PA-18 Heavy duty muffler... MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER Applicability: Piper PA-12, PA-18 Over spar heavy duty wing tie downs Stainless steel with aluminum spacers STC approval (PA-12 SA02067AK, PA-18 SA02066AK) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further... MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER Modification to reduce weight approximately 18.4 lbs when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame. All new electrical components are advised at the time of install. Please refer to FAA... MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER This muffler eliminates the AD 68-05-01. When muffler is purchased, the STC paperwork includes a FAA letter stating that the installation of this muffler is an alternative means of compliance to the A.D. Applicability: Piper PA-18 Heavy duty muffler... MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER Applicability: Piper PA-12, PA-18 Over spar heavy duty wing tie downs Stainless steel with aluminum spacers STC approval (PA-12 SA02067AK, PA-18 SA02066AK) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further... MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER Modification to reduce weight approximately 18.4 lbs when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame. All new electrical components are advised at the time of install. Please refer to FAA... MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER Applicability: Piper PA-12, PA-18 Over spar heavy duty wing tie downs Stainless steel with aluminum spacers STC approval (PA-12 SA02067AK, PA-18 SA02066AK) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further... MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER Modification to reduce weight approximately 18.4 lbs when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame. All new electrical components are advised at the time of install. Please refer to FAA... MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:... MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER Modification to reduce weight approximately 18.4 lbs when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame. All new electrical components are advised at the time of install. Please refer to FAA... MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER Modification to reduce weight approximately 18.4 lbs when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame. All new electrical components are advised at the time of install. Please refer to FAA... MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK This heavy duty light weight tank is approximately 9 ounces lighter than the stock Piper part. Applicability: Piper PA-18 Material: Aluminum STC SA2303NM FAA-PMA approved Direct replacement for Piper part number 10725-00 RETURNS: This product... MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation requires welding modification to existing seat. Applicability: Piper PA-18, PA-19 STC SA02085AK RETURNS: This product cannot be returned. See... MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT Kit allows filler neck to be repaired in the field without welding. Install with fuel tank sealant and CherryMAX rivets. Fuel tank sealant not included. Applicability: Piper PA-18 with aluminum welded fuel tanks Material: Stainless steel FAA-337... MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER Allows rear seat cross bar to be removed for easier loading of aircraft. Installation does not require welding, and takes about 1 hour. Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure... MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 Applicability: Piper PA-18 Material: 4130N Steel STC SA4618NM Heavy duty replacement for Piper part numbers 30602-010 and 30602-007 RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE Applicability: PA-12, PA-14, PA-18, and PA-22 series aircraft using F. A. Dodge 30.5 gallon fuel tanks only Eliminates need for electrical fuel gauge Material: Tygothane tubing with aluminum restrictors Tygothane tubes made for use with Avgas. If... MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-18 3" extended length Heavy duty STC SA02152AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts. Applicability: Piper PA-18 Material: 5052 Aluminum and 6061 T6 Aluminum STC SA02025AK FAA-PMA approved Supercedes part number... MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD Applicability: Piper PA-18 Shroud is split into 2 pieces for easier installation and removal Material: 5052-H32 and 6061-T6 Aluminum STC SA02024AK FAA-PMA approved Direct replacement for Piper part numbers 12436-10 and 71261-08 RETURNS: This... MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3241HR 3241HR HOT ROD MUFFLER AND SHROUD - FITS PIPER MSRP: Now: $2,195.00 Add to Cart Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3241 3241 HEAVY DUTY MUFFLER - FITS PIPER MSRP: Now: $1,285.00 Add to Cart Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3197 3197 AIRCRAFT TIE DOWN BRACKET - FITS PIPER MSRP: Now: $185.00 Add to Cart Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 2127 2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING MSRP: Now: $249.00 Add to Cart Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3304 3304 FRONT SEAT BATTERY BOX - FITS PIPER MSRP: Now: $601.00 Add to Cart Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3169-1A 3169-1A PIPER PA-18 FRONT HEADER TANK MSRP: Now: $499.00 Add to Cart Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3186 3186 FOLDING FRONT SEAT KIT - FITS PIPER MSRP: Now: $542.00 Add to Cart Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3140-60R 3140-60R PIPER PA-18 FILLER NECK REPAIR KIT MSRP: Now: $233.00 Add to Cart Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3146 3146 REMOVABLE REAR SEAT CROSS BAR - FITS PIPER MSRP: Now: $470.00 Add to Cart Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3344 3344 PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3166-1 3166-1 HEAVY DUTY CABANE VEE - FITS PIPER PA-18 MSRP: Now: $544.00 Add to Cart Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3286-1 3286-1 FUEL TANK SIGHT GAUGE MSRP: Now: $96.00 Add to Cart Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3164-3 3164-3 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3182 3182 PIPER 2-PIECE SPLIT PRE-HEAT SHROUD MSRP: Now: $345.00 Add to Cart Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next × OK
Atlee Dodge | part number: 3236AD 3236AD PIPER 2-PIECE MUFFLER SHROUD MSRP: Now: $614.00 Add to Cart Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next
Atlee Dodge | part number: 3225-2A 3225-2A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - RIGHT MSRP: Now: $1,110.00 Choose Options Previous 551 552 553 554 555 556 557 558 559 560 561 Next Previous 551 552 553 554 555 556 557 558 559 560 561 Next
