Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). Applicability: Piper J-3, PA-11, PA-18 1.5" axle, standard length STC SA02236AK Comes with bushings installed in forward and aft upper attach fittings & gussets and... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME Applicability: Piper PA-18 150 hp Better than the original, with reinforced screw hole Stainless steel washer added to prevent wear and tear Material: Aluminum, powder coated white or black Heavy duty replacement for Piper part number... MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 Standard length Heavy duty STC approved (SA4619NM for PA-12, SA4620NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE Applicability: Piper PA-12, PA-14 STC approved (SA4616NM for PA-12, SA4617NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME Applicability: Piper PA-18 150 hp Better than the original, with reinforced screw hole Stainless steel washer added to prevent wear and tear Material: Aluminum, powder coated white or black Heavy duty replacement for Piper part number... MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 Standard length Heavy duty STC approved (SA4619NM for PA-12, SA4620NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE Applicability: Piper PA-12, PA-14 STC approved (SA4616NM for PA-12, SA4617NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 Standard length Heavy duty STC approved (SA4619NM for PA-12, SA4620NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE Applicability: Piper PA-12, PA-14 STC approved (SA4616NM for PA-12, SA4617NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR Prevents main landing gear from collapsing should a landing gear component fail. It is recommended to use new AN hardware when installing new safety cables due to bolt length. Safety cables should always be replaced after a landing gear failure due the... MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE Applicability: Piper PA-12, PA-14 STC approved (SA4616NM for PA-12, SA4617NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE Applicability: Piper PA-12, PA-14 STC approved (SA4616NM for PA-12, SA4617NM for PA-14) RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT Applicability: Piper PA-12, PA-14 For 3 inch extended landing gear Heavy duty STC SA02188AK RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET This bracket provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. If lift strut fitting is bent or has elongated holes it will need to be replaced. Applicability:... MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Applicability: Piper PA-12,... MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER Applicability: Piper PA-18 3312-1 is a direct replacement for Piper part number 471-053 Material: Plastic knob with brass threads Size: 1 inch diameter x 1 inch tall Color: Black knob with red label PMA approval RETURNS: This product cannot be... MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET Applicability: For EDO 89-2000 floats PMA approved RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details. MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT PLEASE NOTE: This landing gear is sold bare (no powder coating or primer). This heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed. Landing... MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP Applicability: Piper J-3, J-5, PA-11, PA-12, PA-14, PA-18, PA-19 Assists with refueling, entering and exiting aircraft Material: Aluminum, powder coated white Landing gear not included; steps priced and sold individually STC SA02007AK An OVERSIZE... MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism Applicability: Piper J-3, PA-11, PA-18, and PA-19 series aircraft Material: Fiberglass and reinforced plastic FAA-PMA approved RETURNS: This product... MSRP: Now: $677.00 Add to Cart Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3225-1A 3225-1A PIPER 1.5 INCH AXLE STANDARD LANDING GEAR - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3281 3281 REINFORCED CARBURETOR HEAT DOME MSRP: Now: $180.00 Add to Cart Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3164-2 3164-2 PIPER STANDARD GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3344A 3344A PIPER SAFETY CABLE KIT - 3 INCH EXTENDED GEAR MSRP: Now: $277.00 Add to Cart Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3166-2 3166-2 PIPER CABANE VEE MSRP: Now: $596.00 Add to Cart Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3164-4 3164-4 PIPER 3-INCH EXTENDED GEAR SHOCK STRUT MSRP: Now: $175.00 Add to Cart Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3192-12 3192-12 WING STRUT REINFORCEMENT BRACKET MSRP: Now: $162.05 Add to Cart Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3143-12 3143-12 WELD-ON AFT FLOAT FITTINGS - FITS PIPER MSRP: Now: $1,033.00 Add to Cart Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3312-1 3312-1 MIXTURE KNOB - FITS PIPER MSRP: Now: $18.00 Add to Cart Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 4237-1 4237-1 EDO FLOAT LOWER ATTACH BRACKET MSRP: Now: $199.00 Add to Cart Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-2 3284-2 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-1 3284-1 PIPER LANDING GEAR 1.25 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-2A 3284-2A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - RIGHT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3284-1A 3284-1A PIPER LANDING GEAR 1.5 INCH AXLE, 3 INCH EXTENDED - LEFT MSRP: Now: $1,110.00 Choose Options Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next × OK
Atlee Dodge | part number: 3195 3195 PIPER LONG LANDING GEAR STEP MSRP: Now: $290.00 Choose Options Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next
Atlee Dodge | part number: 3343 3343 REAR CONTROL STICK COVER MSRP: Now: $677.00 Add to Cart Previous 552 553 554 555 556 557 558 559 560 561 562 Next Previous 552 553 554 555 556 557 558 559 560 561 562 Next
