U12742-004 UNIVAIR MUFFLER SHROUD - FITS PIPER

Applicability: Piper PA-22 FAA-PMA approved

U12436-010 UNIVAIR SHROUD - FITS PIPER

Applicability: Piper PA-18 150hp FAA-PMA approved

U12226-000 UNIVAIR MUFFLER SHROUD ASSEMBLY - FITS PIPER

Applicability: Piper PA-18A 95hp Highlighted part in illustration FAA-PMA approved

U10431-000 UNIVAIR MUFFLER SHROUD - FITS PIPER

Applicability: Piper J-5C, PA-12 FAA-PMA approved

-64873-000 PIPER SHROUD

Applicability: Piper PA-25

-12436-000 PIPER SHROUD

Applicability: Piper PA-18 (105, 125, and 135hp) Aluminum Original Piper part FAA-PMA approved Does not include shroud clip part number U71261-005 (sold separately)

-11955-002 PIPER SHROUD

Applicability: Piper PA-16

-472-682 PIPER SHOULDER HARNESS LINK

U31392-000 UNIVAIR SHORT SHOCK STRUT - FITS PIPER

Applicability: Piper J-3 (serial numbers 8278 and up), PA-11, PA-18, PA-18A, L-4A Used on shock strut units without hydrasorbs FAA-PMA approved Supercedes part numbers 31392-000, 31392-00

U30442-006 UNIVAIR SHORT SHOCK STRUT - FITS PIPER

Applicability: Piper J-3, J-5 FAA-PMA approved Supercedes part numbers 30442-006, 30442-06

U40123-007 UNIVAIR FRONT RUDDER UP PARKING BRAKE CABLE - FITS PIPER

Applicability: Piper J-3, J-5, PA-12 Galvanized steel Length: 25-9/16 inches Diameter: 1/8 inch Construction: 7X19 2 required per aircraft FAA-PMA approved Supercedes part numbers 40123-007, 40123-07

U40071-000 UNIVAIR SHORT FAIRLEAD SEGMENT - SOLD IN HALVES - FITS PIPER

Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-25 PRICE IS FOR 1 HALF FAIRLEAD - two halves required to make one fairlead .81" long Uses U40081-000 fairlead ring FAA-PMA approved Supercedes...

U80022-045 UNIVAIR SHORT BUSHING - FITS PIPER

Short control surface bushing Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-25 Supercedes part number 453-604

U12998-500 UNIVAIR SHOCK SUBASSEMBLY - FITS PIPER

Applicability: Piper PA-18, PA-18A, PA-19, PA-20, PA-22, PA-25 FAA-PMA approved

-12844-003 PIPER LONG SHOCK STRUT

For Hydrasorb shock assembly Hole to hole length: 15.81 inches Applicability: Piper PA-18 with Continental 95hp engine, serial numbers 3014 and up