U40622-007 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18 (150hp), PA-20, PA-22 For navigation light, without strobe...

U40622-000 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper J-5C, PA-12, PA-14, PA-15, PA-16, PA-17 Uncovered Material: 4130N steel FAA-PMA...

-64276-004 PIPER RUDDER

Applicability: Piper PA-25

U40721-002 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper PA-14, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 40721-002, 40721-02

U40721-000 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper J-3, PA-11, PA-12, PA-18 Stabilizer cable guide rubbing block FAA-PMA approved Supercedes part numbers 40721-000, 40721-00

-13945-042 PIPER RUBBER STRIP

-81204-000 PIPER RUBBER PLUG

U10466-033 UNIVAIR ROUND CLAMP - FITS PIPER

Tailpipe support clamp, bottom Applicability: Piper PA-18 (150hp), PA-22 (serial numbers 22-9205 and up) FAA-PMA approved

U452-357 UNIVAIR ROD END BEARING - FITS PIPER

Thread: 1/4-28 Bore: 3/16 inch Type Shank: Male Supercedes part number M34-14

U452-335 UNIVAIR ROD END BEARING - FITS PIPER

Flap push-pull bearing Thread: 1/4-28 Bore: 3/16 inch Type Shank: Female Applicability: Piper J-4, J-5, PA-12, PA-14, PA-20, PA-25 Supercedes part numbers F34-14 and GMW-3M-470

-89307-000 PIPER ROD END

-452-630 PIPER ROD END

U13107-005 UNIVAIR ROD - FITS PIPER

-750-460 PIPER ROD

-71451-010 PIPER INTERCYLINDER TIE ROD - INNER

Applicability: Piper PA-18 Used with Continental engines only Highlighted part in illustration

-71451-009 PIPER ROD