UA-48 TAYLORCRAFT HINGE PIN

Applicability: Taylorcraft models BC12-65, BCS12-65, BC12-D, BCS12-D, BC12-D1, BCS12-D1, BC12D-85, BCS12D-85 Pin for elevator and rudder hinges

U14849-002A UNIVAIR FUSELAGE COWL - FITS PIPER

Crate fee CR-BCPIP will be included in the shipping costs at checkout. For more information see Additional Shipping and Handling Fees. This product will be shipped via FREIGHT only.

U80122-049 PIPER WASHER

Applicability: Piper PA-12 Outside diameter: 4.5 inches Inside diameter: 3 inches FAA-PMA approved

L8WM SILVAIRE OPERATORS HANDBOOK AND PARTS PRICE LIST

Contains operating, parts, and service information for metal spar Luscombes. Applicability: Luscombe Silvaire, models 8, 8A, 8B, 8C, and 8D 54 pages Illustrated This manual is a direct copy of the original; Univair assumes no responsibility for the...

MS35769-18 COPPER ENCASED ANNULAR GASKET

Copper encased annular gasket Material: Copper Supercedes part number AN900-14 Dimensions: A: 7/8 inch inside diameter B: 1-1/8 inch outside diameter C: 3/32 inch

-4-737-4 AERONCA FRONT BAFFLE

-13868-000 PIPER RUDDER CABLE GUARD - RIGHT

Applicability: Piper PA-20, PA-22 Highlighted part in illustration

-82371-017 PIPER HOSE

Applicability: Piper PA-18A Length: 2.75 inches Outer Diameter: 1.0 inch Inner Diameter: 0.63 inch Material: MIL-H-6000 Rubber Hose Supercedes part numbers 82371-17, U82371-017

U81342-008 PIPER TRIM YOKE ATTACH WASHER

Highlighted parts in illustration Priced and sold individually

U81352-011 UNIVAIR AILERON CABLE LINK - FITS PIPER

Applicability: Piper PA-11, PA-18, L-18, L-21, PA-19, PA-25 Highlighted part in illustration FAA-PMA approved Supercedes part numbers 81352-011, 81352-11

U40123-057 UNIVAIR TORQUE TUBE HORN CONNECTOR CABLE - FITS PIPER

Applicability: Piper PA-17 Galvanized steel Length: 11-7/8 inches Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved Supercedes part numbers 40123-057, 40123-57

U40123-054 UNIVAIR AILERON RIGHT BALANCE CABLE - FITS PIPER

Applicability: Piper PA-14 Galvanized steel Length: 107 inches Diameter: 1/8 inch Construction: 1X19 FAA-PMA approved Supercedes part numbers 40123-054, 40123-54

U1715A UNIVAIR MASTER CYLINDER BRAKE PEDAL - FITS PIPER

Univair has produced a master cylinder brake pedal that can be used on the Scott Master Cylinder on Piper J-3, PA-11, PA-12, and PA-18 aircraft. This pedal has a symmetrical design that replaces the separate left and right brake pedals (P/N 1712 and...

U10757-000 UNIVAIR EXHAUST STACK/MUFFLER - LEFT - FITS PIPER

Applicability: Piper PA-11 with Continental C-90 engine An OVERSIZE FEE will be included in the shipping costs at checkout. For more information see Additional Shipping and Handling Fees.

U3241A-003S SCOTT TAILWHEEL SPRING SPACER

FAA-PMA approved Applicability: American Champion, Bellanca, Champion, Aeronca: 7AC, 7ACA, (L-16A), 7BCM, (L-16B), 7CCM, 7DC, 7EC, 7ECA, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7KCAB, 11AC, 11BC, 11CC Cessna 120, 140, 140A, 170, 170A,...

U60872-000 UNIVAIR WING FAIRING - FITS PIPER

Applicability: Piper J-3, PA-11 FAA-PMA approved Supercedes part numbers 60872-000, 60872-00