CAV-160H-4 SAF-AIR DRAIN VALVE

Thread size: 1/4-18 NPT Hose end: 1/4 inch Applicability: Piper models J-3, J-4, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-23, PA-25 Apache Champion Aeronca Cessna T-50 and earlier 120 and 140 models Beechcraft AT-11...

CAV-160 SAF-AIR DRAIN VALVE

Thread size: 1/4-18 NPT Hose end: None Applicability: Piper models J-3, J-4, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22, PA-23, PA-25 Apache Champion Aeronca Cessna T-50 and earlier 120 and 140 models Beechcraft AT-11 and...

CAV-110 SAF-AIR DRAIN VALVE

Fits all standard gascolators Thread size: 1/8-27 NPT Hose end: None Supercedes part number F48220-34 Applicability: Cessna 310 tip tanks Mooney Mark 20 and 20A All Ercoupe models Bellanca Taylorcraft Model B Stinson 108, 108-1, 108-2,...

S6250 SAF-AIR OIL DRAIN VALVE - 5/8 INCH

Thread: 5/8-18

NUT-61HD-8 NUT

61HD-2 NUT

61HD-6 NUT

Supercedes part number 81LB-06

FV2002 GLOBE FUEL VALVE - 1/8 INCH

Miniature globe valve for use as stop cock or drain cock Fits 1⁄8 inch on large end Complete with 3.75 inch handle

F391-CUP FLUSH FUEL SAMPLER CUP

With the F391 fuel sampler cup from MDI Aerovalve, checking your sumps is very simple and can usually be done in less than one minute on the average plane. You can also see water or other contaminants which are flushed from the sump. For use with F391...

F391-53S FLUSH DRAIN VALVE - 7/16 INCH - 20 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

F391-72 FUEL DRAIN VALVE - 7/16 INCH, 20 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

F391-32 FUEL DRAIN VALVE - 3/8 INCH, 24 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

F391-18 FUEL DRAIN VALVE - 1/8 TAPER PIPE

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve designed to be practical, functional, and inexpensive. The head of the...

F391-187 FUEL DRAIN VALVE - 1/8 INCH, 27 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

F391-14 FUEL DRAIN VALVE - 1/4 TAPER PIPE

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

F391-82 FUEL DRAIN VALVE - 1/2 INCH, 20 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...