F391-187B FUEL DRAIN VALVE - 1/8 INCH, 27 THREAD

The F391 flush valve from MDI Aerovalve is used as original equipment by most aircraft manufacturers and has been FAA-PMA approved for replacement parts. This flush fuel drain valve is designed to be practical, functional, and inexpensive. The head of...

CCA-4300 CURTIS DRAIN VALVE - 7/16 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

CCA-39550 CURTIS DRAIN VALVE - 5/8 INCH

Thread size: 5/8 - 18 NF3 Inst. Length Body: 1.050 Spiral to open, turn to lock Lock wire drilled TSO-C76a

CCA-1650 CURTIS DRAIN VALVE - 3/8 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

CCA-1550 CURTIS DRAIN VALVE - 1/8 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

CCA-1600 CURTIS DRAIN VALVE - 1/4 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

CCB-37000 CURTIS DRAIN VALVE - 1/2 INCH

Thread size: 1/2-14 NPT Body Length: 2.128" Stem Length: 1.125" Material: Brass Push to open, turn to lock

CCA-1700 CURTIS DRAIN VALVE - 1/2 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

CCA-7450 CURTIS DRAIN VALVE - 1/8 INCH

Thread size: 1/8 NPT Inst. Length: .750 Material: Cadmium Plated Brass Push to open, turn to lock

CCA-4850 CURTIS DRAIN VALVE - 1/8 INCH

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire is needed in the closed position. FAA approved for use without the safety wire. Stainless steel spring holds valve in closed position. Valve...

32-E-04X04 TWO WAY VALVE - 1/4 X 1/4 INCH

G352 LOW-TEMPERATURE GREASE - 1 LB CAN

NEW OLD STOCK - Inventory is from the 1960's but has never been opened This low-temperature grease meets Military Specification #7421A Ideal as a tachometer and speedometer cable lubricant, as it does not set up at low temperatures Packed in 1 pound...

HYDRAULIC FLUID 5606A

Available in 1 quart and 1 gallon sizes Red hydraulic fluid for use in brake systems and landing gear cylinders Meets Military Specification #5606A (MIL-H-5606A) This product is classified as a HAZMAT item and cannot be shipped outside the...

20010S WORM-DRIVE HOSE CLAMP - SLOTTED SCREW

Worm-drive clamp for use on fuel, oil, air and coolant lines. Won't distort hose. Tighten with flat head screwdriver. Screw Type: Slotted screw with collar Material: Stainless steel Minimum Hose Diameter: 9/16 inch Maximum Hose Diameter: 1-1/6 inch...

20060S WORM-DRIVE HOSE CLAMP - SLOTTED SCREW

Worm-drive clamp for use on fuel, oil, air and coolant lines. Won't distort hose. Tighten with flat head screwdriver. Screw Type: Slotted screw with collar Material: Stainless steel Minimum Hose Diameter: 3-5/16 inch Maximum Hose Diameter: 4-1/4 inch...

QS200-M8S WORM-DRIVE HOSE CLAMP - SLOTTED SCREW

Worm-drive clamp for use on fuel, oil, air and coolant lines. Won't distort hose. Tighten with flat head screwdriver. Screw Type: Slotted screw with collar Screw Material: Steel, cadmium plated Band Material: Stainless steel Minimum Hose Diameter: 1/2...