Univair

U14257-004 UNIVAIR GUSSET - FITS PIPER

U13171-000 UNIVAIR AILERON FALSE SPAR GUSSET - FITS PIPER

Applicability: Piper J-3, L-4, NE-1, NE-2, PA-11, PA-15, PA-16, PA-16S, PA-17, PA-18, L-18, L-21, PA-19, PA-20, PA-22, PA-25 FAA-PMA approved

U13298-000 UNIVAIR ELEVATOR CABLE GUARD - FITS PIPER

Applicability: Piper PA-18 FAA-PMA approved

U11122-004 UNIVAIR GROUND STRAP - FITS PIPER

Applicability: Piper PA-14, PA-16, PA-18, PA-20, PA-22 FAA-PMA approved

U85012-049 UNIVAIR GROMMET - FITS PIPER

Applicability: Piper PA-18, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 85012-49, 85012-049

U64834-000 UNIVAIR REAR STABILIZER INSPECTION GROMMET - FITS PIPER

Applicability: Piper PA-18 (late models), PA-25 FAA-PMA approved

U60671-000 UNIVAIR GROMMET - FITS PIPER

Wing pulley cover cup grommet Applicability: Piper J-3, L-4, J-5, PA-11, PA-12, PA-18 FAA-PMA approved Supercedes part numbers 60671-000, 60671-00

U15761-000 UNIVAIR LIFT STRUT GROMMET - FITS PIPER

Fabric reinforcement Applicability: Piper PA-15, PA-16, PA-17, PA-18, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 15761-000, 15761-00

U10984-000 UNIVAIR GROMMET - FITS PIPER

Applicability: Piper PA-16, PA-18, PA-20 Stabilizer yoke inspection grommet Oval fabric grommet as used at brake line opening FAA-PMA approved

U10293-002 UNIVAIR FABRIC REINFORCEMENT - FITS PIPER

Applicability: Piper J-3, J-5C, PA-11, PA-14, PA-15, PA-17, PA-18, PA-20, PA-22, PA-25 Highlighted part in illustration FAA-PMA approved

U10293-000 UNIVAIR REAR STABILIZER INSPECTION GROMMET - FITS PIPER

Applicability: Piper J-3, J-5C, PA-11, PA-12, PA-14, PA-15, PA-17, PA-18, PA-20, PA-22, PA-25 FAA-PMA approved

U13150-004 UNIVAIR GEAR FAIRING MOULDING - FITS PIPER

U13193-000 UNIVAIR LANDING GEAR FAIRING - FITS PIPER PA-20

Rear leg vee fairing assembly, left or right Applicability: 1952-53 Piper PA-20 Highlighted part in illustration

U13053-000 UNIVAIR GEAR FAIRING - FITS PIPER

Applicability: Piper PA-20 Landing gear rear leg fairing, right or left hand FAA-PMA approved

STC-SA12RM UNIVAIR GEAR CONVERSION STC APPROVAL - FITS PIPER

To issue the STC, Univair requires your aircraft's make, model, registration number, and serial number. Please enter this information in the fields above and accept the Limited Purpose Agreement...

U13016-008 UNIVAIR GEAR CHANNEL - FITS PIPER

Applicability: Piper PA-22 FAA-PMA approved