Univair

U-415-40641 ERCOUPE AIR INTAKE COUPLING

Applicability: Ercoupe 415-C, D, CD, G Supercedes part number 415-40641

U14204-000 UNIVAIR HEADER TANK VENT LINE - FITS PIPER

Applicability: Piper PA-18 FAA-PMA approved

U10815-000 PIPER LOWER COWL MOUNTING BRACKET - LEFT (LONGERON)

Applicability: Piper PA-11 Highlighted part in illustration

STC-SA02128LA UNIVAIR ALUMINUM BEARING BLOCK REPAIR KIT - FITS PIPER

To issue the STC, Univair requires your aircraft's make, model, registration number, and serial number. Please enter this information in the fields above and accept the Limited Purpose Agreement...

U30831-002 UNIVAIR RUBBER BLOCK - FITS PIPER

Applicability: Piper PA-20, PA-22 Dimensions: 1-11/16" x 1" x 5/8" FAA-PMA approved Supercedes part numbers 30831-002, 30831-02

U10112-003 UNIVAIR TUBE - FITS PIPER

U40123-024S UNIVAIR UPPER PARKING BRAKE CABLE - FITS PIPER

Applicability: Piper PA-12 Stainless steel Length: 31-1/16 inches Diameter: 1/8 inch Construction: 7X19 1 required per aircraft FAA-PMA approved Supercedes part numbers 40123-024, 40123-24

MINERAL SPIRITS

Use to thin oil-based paints, enamels and varnishes Ideal for prepping and cleaning surfaces prior to oil-based or latex paint application Great for cleaning spills, brushes and equipment after...

ACETONE

Available in 1 quart, 1 gallon, 5 gallon, and 55 gallon sizes This product is classified as a HAZMAT item and cannot be shipped outside the contiguous United States (lower 48 states). Other...

NITRATE THINNER

Available in 1 quart, 1 gallon, 5 gallon, and 55 gallon sizes Generic brand Ideal for cleaning up spray guns and other painting equipment Not recommended for use with Randolph or Ceconite...

415-40047-R ERCOUPE LONGITUDINAL ASSEMBLY - RIGHT

Bottom longitudinal assembly, right hand DZUS type fasteners

415-40520 ERCOUPE CARBURETOR HEAT SHROUD ASSEMBLY

Highlighted part in illustration

U10630-004 UNIVAIR LEADING EDGE COVER - LEFT - FITS PIPER

Applicability: Piper PA-16 See charts below for aircraft applicability and related skins Leading edge skins are numbered from root to tip Supercedes part numbers 10630-004, 10630-04 FAA-PMA...

U4-548-1 AERONCA LEADING EDGE SKIN

Length: 47.625 inches Highlighted part in illustration Applicability: Aeronca 7AC, 11AC, Champion 7EC/FC, Citabria (early) 7ECA, 7GCAA, 7GCBC, 7KCAB See charts below for aircraft applicability...

SK-83 ERCOUPE INBOARD AILERON INSPECTION PLATE KIT

Ercoupe Service Kit SK-83 contains the necessary inspection plates, doublers, rivets, screws, and clipnuts required to comply with Ercoupe Service Bulletin 35. This kit contains no corrosion...

UAC-1 WELCOME TO UNIVAIR VIDEO

Thousands of people from around the world have been able to visit us at our Aurora, Colorado offices and manufacturing facility. If you haven't, now you can via our UNIVAIR VIDEO. See where, how and...