U14411-003 UNIVAIR STRUT REINFORCEMENT ANGLE - FITS PIPER

Rear spar #3 drag strut reinforcement angle Applicability: Piper J-3, PA-11, PA-15, PA-16, PA-17, PA-18

U14411-002 UNIVAIR STRUT REINFORCEMENT ANGLE - FITS PIPER

Rear spar #2 drag strut reinforcement angle Applicability: Piper J-3, PA-11, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22

U14401-004 UNIVAIR STRUT REINFORCEMENT ANGLE - FITS PIPER

Front spar #3 drag strut reinforcement angle Applicability: Piper J-3, PA-11, PA-15, PA-16, PA-17, PA-18

U14401-003 UNIVAIR STRUT REINFORCEMENT ANGLE - FITS PIPER

Front spar #2 drag strut reinforcement angle Applicability: Piper J-3, PA-11, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22

U81232-030 UNIVAIR SHOCK STRUT LEATHER BUMPER - FITS PIPER

Applicability: Piper J-3, PA-12 FAA-PMA approved

U11281-005 UNIVAIR LIFT STRUT FORK - FITS PIPER

Applicability: Piper PA-15, PA-17 Original style 3/8 inch diameter Rolled thread Stainless steel FAA-PMA approved Supercedes part numbers 11281-000, 11281-00, 11281-004, U11281-004, 11281-04

U14192-000 UNIVAIR STRUT FITTING - FITS PIPER

Applicability: Piper J-3, PA-11, PA-15, PA-17, PA-18 Front spar lift strut fitting FAA-PMA approved NOTE: THE PA-16 PARTS BOOK INDICATES THAT THIS IS THE CORRECT FITTING FOR THE FRONT SPAR. THE MANUAL IS INCORRECT. PER DWG. 11756, THE CORRECT...

U14491-000 UNIVAIR STRUT CLAMP - FITS PIPER

#1 drag strut fairlead clamp Applicability: Piper J-3 FAA-PMA approved

U1031-04 UNIVAIR STRUT BARREL - FITS PIPER

Univair's strut barrel is ready for welding, but must have the threads chased with a number 7⁄16-20 NF-HS-GH1 tap or thread chaser of the same size AFTER being welded into the strut. DO NOT attempt to screw the threaded strut fork in the barrel...

U14232-000 UNIVAIR #1 DRAG STRUT - FITS PIPER

Applicability: Piper J-3, L-4A, PA-11 FAA-PMA approved

-64088-000 PIPER STRUT

Applicability: Piper PA-25

U15722-002 UNIVAIR STROBE LIGHT BRACKET - FITS PIPER

Can be used on the top of Piper rudders Applicability: Piper J-3, PA-11, PA-18, PA-20, PA-22 FAA field approval required

-189-125 PIPER CORK STRIP - 3 FEET

Applicability: Piper PA-20, PA-22 Width: 1/4 inch Length: 3 feet Material: Cork and neoprene Self-adhesive backing

U70841-001 UNIVAIR STRIP - FITS PIPER

U70841-000 UNIVAIR STRIP - FITS PIPER

U14787-003 UNIVAIR LANDING LIGHT LENS ATTACHING STRIP - FITS PIPER

Landing light attach strip, top and bottom Applicability: Piper PA-18 (150hp, serial numbers 5059 and up), PA-25 Highlighted part in illustration