U61410-000 UNIVAIR RUDDER CABLE FITTING - FITS PIPER

U13109-000 UNIVAIR RUDDER CABLE - FITS PIPER

Applicability: Piper PA-22 Galvanized steel Length: 181.5 inches Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved

U11641-004 UNIVAIR RUDDER CABLE - FITS PIPER

Applicability: Piper PA-16, PA-20 Length: 181-1/2 inch Galvanized steel Highlighted part in illustration FAA-PMA approved

U12651-000 UNIVAIR RUDDER BRACKET - FITS PIPER

Applicability: Piper J-5C, PA-12, PA-14, PA-15, PA-16, PA-17 FAA-PMA approved

U15726-002 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER PA-18

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18, serial numbers 7509123 and up Rudder with strobe bracket Uncovered Includes...

U41313-000 UNIVAIR RUDDER ASSEMBLY - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper J-3, L-4A, L-4B, PA-11 Uncovered Material: 4130N steel FAA-PMA approved Supercedes part...

U40622-008 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18, PA-20, PA-22 FAA-PMA approved Without navigation light, and no strobe...

U40622-007 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper PA-18 (150hp), PA-20, PA-22 For navigation light, without strobe...

U40622-000 UNIVAIR RUDDER ASSEMBLY - UNCOVERED - FITS PIPER

This rudder complies with AD 2025-02-11. Univair rudders for Piper aircraft have been made with 4130N steel tube since approval in 1976. Applicability: Piper J-5C, PA-12, PA-14, PA-15, PA-16, PA-17 Uncovered Material: 4130N steel FAA-PMA...

-64276-004 PIPER RUDDER

Applicability: Piper PA-25

U40721-002 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper PA-14, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 40721-002, 40721-02

U40721-000 UNIVAIR RUBBING BLOCK - FITS PIPER

Applicability: Piper J-3, PA-11, PA-12, PA-18 Stabilizer cable guide rubbing block FAA-PMA approved Supercedes part numbers 40721-000, 40721-00

-13945-042 PIPER RUBBER STRIP

-81204-000 PIPER RUBBER PLUG

U10466-033 UNIVAIR ROUND CLAMP - FITS PIPER

Tailpipe support clamp, bottom Applicability: Piper PA-18 (150hp), PA-22 (serial numbers 22-9205 and up) FAA-PMA approved

U452-357 UNIVAIR ROD END BEARING - FITS PIPER

Thread: 1/4-28 Bore: 3/16 inch Type Shank: Male Supercedes part number M34-14