MS24629-10 PAN HEAD THREAD-CUTTING SCREW

Pan head tapping thread-cutting screw, cross recessed Tapered end, slotted Material: Carbon steel, cadmium plated Thread: 4-40 Length: 1/4 inch NOTE: We do not provide manufacturer's certification or similar documentation on this product.

A425A-V WHELEN LENS RETAINER - VERTICAL

U61964-200 UNIVAIR FUEL VALVE HANDLE - FITS PIPER

Applicability: Piper PA-18, PA-19, PA-20, PA-22 For use with U491-947K fuel valve FAA-PMA approved Supercedes part numbers 61964-02 Also replaces: assembly consisting of 464-016 handle and 12857-000 pointer assembly consisting of 13033-00...

-282134 LUSCOMBE ROOT NOSE RIB - LEFT

Applicability: Luscombe 8 Series Highlighted part in illustration

U415-34104 ERCOUPE TAXI SPRING

Taxi spring for nose gear assembly Applicability: Ercoupe 415 series Highlighted part in illustration

MS20005-5 INTERNAL WRENCHING BOLT

Internal wrenching bolt, undrilled Material: Steel, cadmium plated Length: 5/16 inch Grip: 5/16 inch Thread: 5/16-24 Head Diameter: 17/32 inch Hex: 7/32 inch Supercedes part number NAS145-14 NOTE: We do not provide manufacturer's...

AS3493-01 ENGINE ACCESSORY DRIVE GASKET

Engine accessory drive gasket, type XII or type XIV Fuel, lubricant, coolant, water, and high temperature resistant Material: Rubber Supercedes part number AN4047-1 Dimensions: A: 4-3/16 inch diameter B: 6 inch diameter C: 1/64 inch 12...

-13432-003 PIPER PA-22 BUBBLE WINDSHIELD - SN 8000 AND UP

Applicability: Piper PA-22, serial numbers 8000 and up Color: Clear This item will be shipped via FREIGHT only

AD60-W-911 EDO FLOAT PULLEY WITH BRACKET

Aluminum bracket with nylon pulley RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details.

-08231 LUSCOMBE RIB

U42702-005 UNIVAIR AILERON BALANCE CABLE - FITS PIPER

Applicability: Piper PA-25 Material: Stainless steel Length: 143.59 inches Cable Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved Supercedes part numbers 42702-002, 42702-02

3166-2AF CABANE VEE ATTACH FITTINGS - FITS PIPER

Needed to install a PA-18 Cabane Vee on a PA-12 or PA-14 fuselage equipped with PA-18 style landing gear. Installed per Roger Borer Drawing #1000-1 from STC SA148AL. His daughter Karen maintains his STC’s. She can be reached at (907) 317-7732...

1022-12 ATLEE DODGE TAIL BRACE BEEF UP - FITS PIPER

Used to strengthen the aft tail section to prevent twisting. May be clamped in position using the included hose clamps, or welded in place. For welding procedures, refer to FAA AC 43.13. Applicability: Piper PA-12 Material: 4130N steel tubing, powder...

AD2256-1 EDO FLOAT PULLEY

Applicability: Used on EDO floats Material: Nylon RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details.

PA18SS-3 FIVE PIECE SEAT CUSHION SET - RED - FITS PIPER

Five piece front and rear seat set Color: Red Set includes 2 bottom cushions, 2 back cushions, 1 lower door seal Applicability: Piper PA-18