Univair

U85012-018 PIPER TRIM CRANK PULLEY ATTACH WASHER

Applicability: Piper PA-20, PA-22 Highlighted part in illustration FAA-PMA approved

U85012-006 UNIVAIR RUDDER PEDAL WASHER - FITS PIPER

Applicability: Piper PA-11, PA-12, PA-14, PA-18, PA-19, L-18, L-21, PA-22 Highlighted part in illustration FAA-PMA approved Supercedes part numbers AN940-10, 85012-06, 85012-006

U81342-056 UNIVAIR BATTERY BOLT TERMINAL WASHER - FITS PIPER

Applicability: Piper PA-18 (serial numbers 2850, 2857 and up), PA-23, PA-24 Highlighted part in illustration FAA-PMA approved Supercedes part numbers 81342-56, 81342-056

U81342-029 UNIVAIR WASHER - FITS PIPER

U80122-086 UNIVAIR CLEVIS PIN WASHER - FITS PIPER

Applicability: Piper J-3, PA-11, PA-14, PA-18, PA-22 Supercedes part numbers U80122-016 and 80122-016

U40592-000 UNIVAIR VERTICAL STABILIZER - FITS PIPER

Applicability: Piper J-3, J-4, J-5, PA-11, PA-12, PA-14, PA-18 4130 Steel Tubing Uncovered Includes bushings FAA-PMA approved Supercedes part numbers 40592-000, 40592-00

U14246-000 UNIVAIR VENT DOOR PLATE - FITS PIPER

Applicability: Piper PA-22, PA-25 FAA-PMA approved

U14240-002 UNIVAIR VENT DOOR PLATE - FITS PIPER

Applicability: Piper PA-22, PA-25 FAA-PMA approved

U14246-002 UNIVAIR VENT DOOR GASKET - FITS PIPER

Applicability: Piper PA-22, PA-25 FAA-PMA approved

U14240-003 UNIVAIR VENT DOOR GASKET - FITS PIPER

Applicability: Piper PA-22, PA-25 FAA-PMA approved

U12956-004 UNIVAIR OIL QUICK DRAIN VALVE - FITS PIPER

Applicability: Piper PA-18, PA-20, PA-22 For use on Lycoming engines FAA-PMA approved

U82371-033 UNIVAIR VACUUM HOSE - FITS PIPER

Applicability: Piper PA-18, PA-20, PA-22, PA-23 Length: 18.0 inches Outer Diameter: 0.75 inch Inner Diameter: 0.38 inch Material: MIL-H-6000 Rubber Hose FAA-PMA approved Supercedes part...

U14261-002 UNIVAIR UPPER PULLEY BRACKET - FITS PIPER

Applicability: Piper PA-15, PA-16, PA-17, PA-20, PA-22

U16462-000 UNIVAIR UPPER N BRACE TUBE - FITS PIPER

Applicability: Piper J-3, J-5C, PA-11, PA-12, PA-14, PA-15, PA-16, PA-17, PA-18, PA-20, PA-22 FAA-PMA approved Supercedes part numbers 16462-000, 16462-00

U12515-003 UNIVAIR UPPER FLAP CABLE - FITS PIPER

Applicability: Piper PA-20, PA-22 (1953-1954 serial numbers 807 and up) Galvanized steel Length: 141.5 inches Construction: 7X19 Cable Diameter: 1/8 inch FAA-PMA approved

U40123-022 UNIVAIR ELEVATOR CABLE (TO UPPER HORN) - FITS PIPER

Applicability: Piper J-5, PA-12 Galvanized steel Length: 133-5/8 inches Diameter: 1/8 inch Construction: 7X19 1 required per aircraft FAA-PMA approved Supercedes part numbers 40123-022,...