Univair

U60764-002 UNIVAIR SUPPORT PLATE - FITS PIPER

Applicability: Piper PA-18 150hp FAA-PMA approved

U80032-075 UNIVAIR CLAMP - FITS PIPER

Applicability: Piper PA-22 FAA-PMA approved

415-738-10 ERCOUPE CLAMP

A-920 TAYLORCRAFT BUSHING

U13152-005 UNIVAIR LANDING GEAR FAIRING - RIGHT - FITS PIPER

Landing gear belly fairing, right Applicability: Piper PA-22, serial numbers 354 and up Used on PA-22-108 if auxiliary fuel system is installed FAA-PMA approved

U1260A UNIVAIR MASTER CYLINDER ASSEMBLY - RIGHT - FITS PIPER

Applicability: Piper J-3, PA-12, PA-18, PA-22 FAA-PMA approved Supercedes part numbers 1260H and 451-701

U1248A UNIVAIR MASTER CYLINDER ASSEMBLY - LEFT - FITS PIPER

Applicability: Piper J-3, PA-12, PA-18, PA-22 FAA-PMA approved Supercedes part number 1248H

U81342-019 UNIVAIR WASHER - FITS PIPER

Applicability: Piper PA-12, PA-15, PA-16, PA-17, PA-22, PA-23, PA-24, PA-25 FAA-PMA approved

U81342-006 UNIVAIR WASHER - FITS PIPER

Applicability: Piper J-3, J-5, PA-11, PA-12, PA-18, PA-20, PA-22 FAA-PMA approved

U41431-000 UNIVAIR AILERON STOP - WOOD SPAR - ROUND - FITS PIPER

Aileron hinge bracket for round wood spars Applicability: Piper J-3, L-4, NE-1, NE-2 FAA-PMA approved

UA-48 TAYLORCRAFT HINGE PIN

Applicability: Taylorcraft models BC12-65, BCS12-65, BC12-D, BCS12-D, BC12-D1, BCS12-D1, BC12D-85, BCS12D-85 Pin for elevator and rudder hinges

U14849-002A UNIVAIR FUSELAGE COWL - FITS PIPER

Crate fee CR-BCPIP will be included in the shipping costs at checkout. For more information see Additional Shipping and Handling Fees. This product will be shipped via FREIGHT only.

U80122-049 PIPER WASHER

Applicability: Piper PA-12 Outside diameter: 4.5 inches Inside diameter: 3 inches FAA-PMA approved

L8WM SILVAIRE OPERATORS HANDBOOK AND PARTS PRICE LIST

Contains operating, parts, and service information for metal spar Luscombes. Applicability: Luscombe Silvaire, models 8, 8A, 8B, 8C, and 8D 54 pages Illustrated This manual is a direct copy of...

U81352-011 UNIVAIR AILERON CABLE LINK - FITS PIPER

Applicability: Piper PA-11, PA-18, L-18, L-21, PA-19, PA-25 Highlighted part in illustration FAA-PMA approved Supercedes part numbers 81352-011, 81352-11

U40123-057 UNIVAIR TORQUE TUBE HORN CONNECTOR CABLE - FITS PIPER

Applicability: Piper PA-17 Galvanized steel Length: 11-7/8 inches Diameter: 1/8 inch Construction: 7X19 FAA-PMA approved Supercedes part numbers 40123-057, 40123-57