View All

2-326 SCINTILLA DISC (NO. 6)

Approximately 5/16 inch diameter

2-327 SCINTILLA DISC (NO. 7)

Approximately 5/16 inch diameter

2-328 SCINTILLA DISC (NO. 8)

Approximately 5/16 inch diameter

61581-2 LYCOMING PRIMER TUBE ASSEMBLY

Cylinder No. 3 and No. 4 Length: 11-11/16 inches Applicability: Lycoming O-235, O-290, O-320, IO-320, LIO-320, O-340, O-360 and IO-360 series engines, see Lycoming parts catalogs for exact engine models

A700-10-0440 BUTTON LOCK CONTROL - 44 INCH - BLACK KNOB

Provides a 10-lb locking force for light and medium service applications. Anodized aluminum knob with aluminum release button. Manufactured with .062-inch diameter stainless steel wire core in flexible metal casing. May be shortened as required...

CCB-37000 CURTIS DRAIN VALVE - 1/2 INCH

Thread size: 1/2-14 NPT Body Length: 2.128" Stem Length: 1.125" Material: Brass Push to open, turn to lock

STD-1415 LYCOMING HEX HEAD BOLT

Thread: 1/4-20 Length: 1-3/4 inch Applicability: Lycoming O-235, O-290, O-340, O-360 and IO-360 series engines, see Lycoming parts catalogs for exact engine models

STD-853 LYCOMING UNION TEE

1/8 inch tube Applicability: Lycoming O-235, O-290, O-320, IO-320, LIO-320, O-340, O-360, IO-360 and O-540 series engines, see Lycoming parts catalogs for exact engine models

U3991 CONTINENTAL PROPELLER HUB FLANGE

Front plates are required for wood propellers on flange shaft engines Applicability: Continental engines A-65, A-75, C-75, C-85, C-90, O-200 Supercedes part numbers 10351 and 3991 FAA-PMA approved

10-7611 SCINTILLA WASHER

Plain washer (distributor block screw) For S4N basic assembly 10-51360 For S6N basic assembly 10-51365

101-36 UNIVAIR IGNITION LEAD

5/8 x 24 plugs and Bendix Scintilla S4, S6 series with threaded cap, and Bendix S20, S200, S700, S1200, and D2000 magnetos with threaded 11/64 x 24 male outlets Length: 36 inches ferrule-to-ferrule Elbow Design: 5/8 x 24, 70 degrees Terminal...

653879 CONTINENTAL FUEL PUMP GASKET

A730-10-1440 PUSH-PULL CONTROL - 144 INCH- BLACK KNOB

Basic push-pull control and glide-free action, with solid wire end. Ideal for cabin and carburetor heat, or fresh air controls. May be cut to the specific length you require for your particular application. Length: 144 inches Solid wire end Black...

STD-1433 LYCOMING HEX HEAD BOLT - DRILLED

Drilled end Thread: 1/4-20 Length: 1-1/2 inch Applicability: Lycoming O-235, O-290, O-320 and O-340 series engines, see Lycoming parts catalogs for exact engine models

10-13797 SCINTILLA SCREEN

10-50771 SCINTILLA GROMMET

Cable outlet grommet