View All

10-52305 SCINTILLA GROUND TERMINAL KIT

Used on: S4N-20 magnetos, installation number 10-51360-4 S4N-21 magnetos, installation number 10-51360-6 Part NumberDescriptionQuantity 10-37669 Nut - Coupling (Ground Terminal) 1 10-7030 Ferrule - Outer (Ground...

10-52936 SCINTILLA HIGH TENSION TERMINAL KIT

Use with stainless steel wires only Each magneto requires a high tension terminal kit and a ground terminal kit Kit Includes: Part NumberDescriptionQuantity 10-52934 Grommet (cable protection; non-shielded...

10-9967 SCINTILLA SHIELD

Ventilator shield (breaker cover) For S4N-20 magneto installation number 10-51360-11 For S4N-21 magneto installation numbers 10-51360-10, -12 For S6N-20 magneto installation number 10-51365-15 For S6N-21 magneto installation numbers 10-51365-1...

101-45 UNIVAIR IGNITION LEAD

5/8 x 24 plugs and Bendix Scintilla S4, S6 series with threaded cap, and Bendix S20, S200, S700, S1200, and D2000 magnetos with threaded 11/64 x 24 male outlets Length: 45 inches ferrule-to-ferrule Elbow Design: 5/8 x 24, 70 degrees Terminal...

15114 FRANKLIN RELIEF VALVE NUT LOCK WASHER

2 required per engine Priced and sold individually

17685 FRANKLIN PISTON PIN PLUG

12 required per engine Priced and sold individually

18396 FRANKLIN MANIFOLD EQUALIZER PIPE HOSE

Material: Rubber Inner Diameter: 1.0 inch Outer Diameter: 1.375 inch Length: 3 inches All measurements are approximate.

1858751 DELCO TERMINAL STUD

This part is surplus inventory from the original manufacturer and is available until our supply runs out.

1908843 DELCO PULLEY

This part is surplus inventory from the original manufacturer and is available until our supply runs out.

19180 FRANKLIN CRANKSHAFT GEAR KEY

1 required per engine Priced and sold individually

19484 FRANKLIN HEX NUT

Cylinder to crankcase Thread: 3/8-24 24 required per engine Priced and sold individually

22534 CONTINENTAL SCREW

24321 CONTINENTAL CRANKSHAFT SEAL

Crankshaft seal for the following Continental engines with tapered shafts: A-65, -75 C-75, -85

31C-12-P07 LYCOMING STUD - OVERSIZE

Oversize: +0.007 inch Thread: 5/16-18 Length: 1.5 inches Applicability: Lycoming IO-390-C, IO-390-D and IO-580 series engines, see Lycoming parts catalogs for exact engine models

401507 CONTINENTAL WASHER

60403 LYCOMING PISTON PIN

Applicability: Lycoming O-235 and O-290 series engines, see Lycoming parts catalogs for exact engine models