part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100-4 AN100-4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100C4 AN100C4 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 3/32, 7/64, 1/8 inch Length... MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN115-16 AN115-16 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 1,600 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100-3 AN100-3 CABLE THIMBLE Thimble is made in conformance with government procurement specification MIL-T-5677 and Air Force-Navy Aeronautical Standard drawing AN100. For Cable Diameters: 1/16, 5/64 inch Length... MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: SA361-2 SA361-2 EYE END CABLE TERMINAL Cable strap terminal, eye end Material: Stainless steel Cable Size: 1/16 inch diameter For use with MS20664-2 Dimensions A: 1-3/32 inch B: 3/8 inch diameter C: 3/16 inch diameter D:... MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand... MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: MS20668-2 MS20668-2 EYE END TERMINAL Eye end swaging wire rope terminal Material: Stainless steel Cable Diameter: 1/16 inch Minimum Breaking Strength: 480 lbs Supercedes part number AN668-2 Dimensions: A: 1-5/8 inch B:... MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN115-21 AN115-21 CABLE SHACKLE Material: Steel, cadmium plated Shackle and Cable Strength: 2,100 lbs Dimensions A: 5/32 inch B: 5/16 inch C: 11/64 inch D: 3/16 inch E: 1/4 inch Related parts Thimble:... MSRP: Now: $39.30 Add to Cart part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-3-M 18-3-M NICOPRESS COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.72 Add to Cart part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-2-G 18-2-G NICOPRESS COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.26 Add to Cart part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-1-C 18-1-C NICOPRESS COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.16 Add to Cart part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-2-G 28-2-G NICOPRESS ZINC PLATED COPPER SLEEVE - 3/32 INCH MSRP: Now: $0.51 Add to Cart part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-4-P 28-4-P NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.58 Add to Cart part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-1-C 28-1-C NICOPRESS ZINC PLATED COPPER SLEEVE - 1/16 INCH MSRP: Now: $0.18 Add to Cart part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100-4 AN100-4 CABLE THIMBLE MSRP: Now: $0.34 Add to Cart part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 28-3-M 28-3-M NICOPRESS ZINC PLATED COPPER SLEEVE - 1/8 INCH MSRP: Now: $0.82 Add to Cart part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100C4 AN100C4 CABLE THIMBLE MSRP: Now: $0.72 Add to Cart part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN115-16 AN115-16 CABLE SHACKLE MSRP: Now: $22.50 Add to Cart part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: AN100-3 AN100-3 CABLE THIMBLE MSRP: Now: $0.40 Add to Cart part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: SA361-2 SA361-2 EYE END CABLE TERMINAL MSRP: Now: $7.03 Add to Cart part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-4-P 18-4-P NICOPRESS COPPER SLEEVE - 5/32 INCH MSRP: Now: $1.18 Add to Cart part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: 18-6-X 18-6-X NICOPRESS COPPER SLEEVE - 3/16 INCH MSRP: Now: $1.50 Add to Cart part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next × OK
part number: MS20668-2 MS20668-2 EYE END TERMINAL MSRP: Now: $4.84 Add to Cart part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next
part number: AN115-21 AN115-21 CABLE SHACKLE MSRP: Now: $39.30 Add to Cart 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next
