View All

-282215 LUSCOMBE LANDING LIGHT BRACKET

Applicability: Luscombe 8 Series Fastens on front spar

-58400-3 LUSCOMBE HORIZONTAL STABILIZER SKIN

Applicability: Luscombe 8 Series Outside stabilizer skin adjoining tip, top and bottom, left or right Round type

2127 PIPER PA-18 GOLD AIRCRAFT SKI SPRING

These metal springs replace bungee cords on the front safety cable assemblies of ski equipped airplanes to improve ski rigging tension in cold weather. See Atlee Dodge's installation instructions for other applicability requirements. Applicability:...

U18110 LUSCOMBE TAIL TRAY REINFORCEMENT BRACKET

Applicability: Luscombe 8 Series

U18270 LUSCOMBE AILERON TIP HINGE - OUTBOARD

Applicability: Luscombe 8 Series FAA-PMA approved

U18431 LUSCOMBE SQUARE TIP RUDDER SPAR

Applicability: Luscombe 8 Series Highlighted part in illustration FAA-PMA approved

U48272-2 LUSCOMBE TIP OUTBOARD AILERON RIB - LEFT

Applicability: Luscombe 8 Series Highlighted part in illustration FAA-PMA approved

U48452-L LUSCOMBE HORIZONTAL STABILIZER TIP ASSEMBLY - LEFT

Round type Applicability: Luscombe 8 Series FAA-PMA approved

U582208-303 LUSCOMBE WINGTIP BOW - RIGHT

Applicability: Luscombe 8A with all-metal wings Not drilled for lights FAA-PMA approved

-18223 LUSCOMBE NOSE RIB

-282211 LUSCOMBE NOSE RIB - LEFT

Applicability: Luscombe 8 Series Leading edge tip nose rib, inboard, left hand Highlighted part in illustration

U18313-2 LUSCOMBE TIE ROD UNIVERSAL

Applicability: Luscombe 8A, 8E FAA-PMA approved

U18812 LUSCOMBE LEADING EDGE STIFFENER - CENTER

Applicability: Luscombe 8 Series FAA-PMA approved

U285015-99R LUSCOMBE AILERON BALANCE CABLE - RIGHT

Applicability: Luscombe 8 Series Galvanized steel Length: 15 feet 10.75 inches FAA-PMA approved Note: Cable U285015 comes in two different lengths. Please check the length your specific aircraft requires before ordering. Part Number U285015...

U38008-2 LUSCOMBE #2.5 BULKHEAD STAMPING

Stampings are not finished and must be fitted to an individual aircraft

U38104-2 LUSCOMBE #2 BULKHEAD BOTTOM STRIP SKIN

Applicability: Luscombe 8 Series For use with 2-piece gear Highlighted part in illustration FAA-PMA approved