View All

U14849-000 UNIVAIR FUSELAGE COWL ASSEMBLY - FITS PIPER PA-18

Applicability: Piper PA-18 150hp, 9 inch panel, serial numbers 8020 and up Excludes cold air box and windshield strips FAA-PMA approved Supercedes part numbers 14849-000, 14849-00 Crate fee CR-BCPIP will be included in the shipping costs at...

U15562-003 UNIVAIR OUTBOARD AILERON BAY FALSE SPAR - RIGHT - FITS PIPER

Applicability: Piper PA-15, PA-16, PA-17, PA-18 See charts below for aircraft applicability and related parts Parts are numbered/identified from root to tip Highlighted part in illustration FAA-PMA approved Supercedes part numbers 15562-003,...

U40123-066S UNIVAIR BUNGEE CABLE - FITS PIPER

Applicability: Piper PA-18 Stainless steel Length: 20-9/16 inches Diameter: 1/16 inch Construction: 7X7 FAA-PMA approved Supercedes part numbers 40123-066, 40123-66

U40123-088 UNIVAIR BUNGEE CABLE - FITS PIPER

Applicability: Piper PA-18 Seaplane Stainless steel Length: 4-1/4 inches Diameter: 1/16 inch Construction: 7X7 FAA-PMA approved Supercedes part numbers 40123-088, 40123-88

-10525-014 PIPER AIR DUCT HOSE

Exhaust stack shroud to bottom cowl tube Material: Aeroduct SCAT Diameter: 2 inches Length: 3 inches Applicability: Piper PA-18 (serial numbers 1262 to 6963), PA-20, PA-22

-10554-000 PIPER AIRSPEED TUBE

Applicability: Piper PA-18

-10633-000 PIPER SUPPORT PLATE

Applicability: Piper PA-11, PA-16, PA-18

-10870-017 PIPER CABLE

Applicability: Piper PA-18, PA-18A Stainless steel Length: 204-5/16 inch Diameter: 1/8 inch Construction: 7X19

-11279-003 PIPER BRACKET SUPPORT - REAR LEFT

Applicability: Piper PA-18 Used with Continental C-90-12F engine Highlighted part in illustration

-11797-005 PIPER BAFFLE ASSEMBLY - REAR LEFT

Applicability: Piper PA-18 with Continental C-90-12F engine only Highlighted part in illustration

-11987-015 PIPER TUBE ASSEMBLY

Applicability: Piper PA-18

-11987-041 PIPER BRAKE LINE

-12193-009 PIPER HEADLINER CHANNEL

Applicability: Piper PA-18

-12193-010 PIPER HEADLINER CHANNEL

#3 headliner arch Applicability: Piper PA-18

-12425-000 PIPER FRONT SIDE BAFFLE ASSEMBLY - RIGHT

Applicability: Piper PA-18 with 105, 125, 135hp Lycoming engines Highlighted part in illustration

-12447DWG PIPER PA-18 105/125/135HP ENGINE INSTALLATION DRAWING

Applicability: Piper PA-18 105-135hp RETURNS: This product cannot be returned. See our Returns & Refunds policy for further details.