View All

415-52113 ERCOUPE UNIVERSAL JOINT

Control shaft and column universal joint Highlighted part in illustration

F40594 ERCOUPE SPINNER DOME - METAL PROP

Any of the following combinations may be used on Ercoupe, Forney, Alon or Mooney with this dome. However, you must select the proper assembly for your particular propeller and crankshaft combination. Supercedes part number...

F52034 ERCOUPE AILERON PUSHROD - LESS ENDS

Applicability: Ercoupe 415 series Ends not included 2 required per plane Priced and sold individually Supercedes part number 415-52034

SK-288 ERCOUPE TRIM TAB SPRING

Elevator trim tab spring For model 415-E Supercedes part numbers -22035 and -430037-003

415-40167 ERCOUPE MUFFLER ATTACH CLAMP

415-40490-L ERCOUPE REAR BAFFLE CLIP - LEFT

DFM ERCOUPE 415-D FLIGHT MANUAL

Applicability: Ercoupe Model 415-D 15 pages Illustrated If you need the EFMS Weight and Balance Supplement for Ercoupe 415-C as well, please order part number CFM Ercoupe 415-C Flight Manual. CFM is a set that includes both the DFM manual and the...

F34411 ERCOUPE LOWER OUTER BUSHING

Applicability: Forney, serial numbers 5675 and later For nose gear assembly SK-17 Supercedes part number 415-34411

415-51007 ERCOUPE NON-SPIN PLACARD - LATE MODEL

Applicability: Late Ercoupe, serial numbers 113 to 812 Aluminum placard Brown with silver lettering Size: 2.75 inches wide by 7/16 inches high

415-52149 ERCOUPE CONTROL COLUMN SHIM

415-22007 ERCOUPE ELEVATOR END HINGE

Applicability: Ercoupe 415 series 2 required per plane Priced and sold individually

415-51044 ERCOUPE TRIM STRIP

ERCOUPE FLAT WINDSHIELD

Applicability: Ercoupe 415, Forney Available colors: Clear, green, gray Thickness: .080 inch Manufactured of high optic quality acrylic Trimmed to OEM specifications FAA-PMA approved Highlighted part in illustration An OVERSIZE FEE will be...

F24001-17 ERCOUPE SPACER

Rudder mounting bolt spacer Applicability: Ercoupe 415 series, Forney 4 required per plane Priced and sold separately Supercedes part number 415-24001-17

F40569 ERCOUPE RIGHT FRONT BAFFLE

Supercedes part number 415-40569

F52479-9 ERCOUPE ROD ASSEMBLY WITH STUD

Ercoupe nose gear pushrod with stud For use with rod end bearings (sold separately) Length: 16.9 inches Supercedes part number 415-52479-9